backing plate = the back of brake pad?
Announcement
Collapse
No announcement yet.
Brake Pads Thread
Collapse
X
-
Originally posted by K.C. View Postbacking plate = the back of brake pad?
Put the side of my track pads against a steel straight edge and you can see how mine bow in the middle (where the caliper pushes against it). Doesn’t meant that it happened at my last track day. My brakes have felt NQR for the past couple of track days. New pads look like the short term solution and better calipers look like the long term solution.Honda DC2R Integra
If I change the nut behind the wheel then my sloppy lines improve and I can get some consistency to sort out my iffy handling, my worrying lack of braking ability goes away, after that I can start fretting about my suspicious lack of straight line grunt.
Comment
-
Initial thoughts on the pads... very very nice... when i got them, my mechanic had already done the primarybed in, but told me to take it easy for the first 100kms.
On the way home i was a bit concerned as the pedal was spongey and it didnt give me the instant confidence i was used too with the OEM pads.
However, as they warmed up and i got closer to home, i started to feel how responsive they were, and the actual stopping power was much improved.
I havent heard any squeal, or any noisiness at all, as far as im concerned i didnt buy my car to enjoy classical music, so its pretty noisey already. But having said that the only noise i heard was that slight shuddering noise as your coming to a complete stop when travelling slow, kinda like they were glazed, and that was late at night on my way home.
I havent given them much yet, but i can already tell that they are going to be awesome on the track, cant wait to get out there!
The discs look great, even though the OEM ones weren't warped as it turns out, so i'll just flog them later, and see how the car feels on the track with the discs, and also report on the ELF brake fluid
All in all, i think they are a great thing thus far, and also Tony from Vsport was a geat guy to deal with, he delivered the pads to my mechnic personally, and when he discovered the rears were the wrong ones, he had the right ones to my mechanic within 2 hours, personally delivered.
Good trader, great price, great products.
Stay tuned
Comment
-
Originally posted by air23box View PostMugen Type S is quiet good......give you better bite over oem pads for street driving........while I use them on track they last 5 hot laps without fading......which really suprise me.......I use them for both track and street...low dust and low disc wear......and not expensive.....I can hook you up with some good deals....'03 Integra DC5 Type R
Naturally Aspirated, K20A i-Vtec
Wakefield Park: 1:13.047 w/ street tyres
Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
Power: 155Kw with Mugen N1 ECU
Comment
-
um...I dun think you really need to warm them up....I dun feel any different when its cold compare to oem...but it just last longer and bite harder.....Mugen Whore #2
ヒール&トウのやりかた
1)ブレーキを踏む
2)クラッチを切る
3)シフトダウンしなから、
アクセルをぶかす
4)クラッチをつなぐ
:blah:
インテ君と共に歩み続けて早1年・・・いろんな所へ出かけ楽しく過ごしてきましたが、事情により手放すこと となりました。(T0T)
人生で初めて走る楽しさを教えてくれた「インテグラ TYPE R」・・・初めて走った時は何もかも衝撃的でした。今でも走る楽しさは変わらないですが。。。残念です。今 まで本当に感動をありがとう!
Comment
-
Integra DC5R
Caliper: K-Sport 8 pot
Pads: Front: Ferodo DS 2500 for the Harrop 6 pot caliper
Rear: Endless SSS
Rotors: Front: K-Sport 300 x 32mm
Rear: OEM
Fluid: Endless RF 650
Price of pads: Front: $480 delivered
Rear: $260 delivered
I was disappointed when I went to buy the Endless pads for the front, as they would have to be a special order item in the SSS spec, along with taking around 5 weeks to be made and shipped... but also that they would cost over $550 + shipping.
I had heard great things about these pads, but opted for the Ferodo DS2500 as they were $100 cheaper and were in Sydney ready to ship overnight.
I had the new brake setup fitted on friday but only got to bed them in last night on the freeway.
My first impression was that they stop HARD.... VERY HARD! I was pulling up from 110kph so quickly that it really caught me by surprise, with the ABS kicking in quickly, even though I had a new set of Bridgestone RE55S fitted the same day. This was on only about 85% pedal pressure. So to continue the bed in properly without the ABS jumping in, I had to reduce it quite a bit.
After the bed-in, I let them cool down for about two hours, then went for a long, spirited run on a private mountain road.
Even pushing the car as hard as it would go for 15 or 20 minutes, I barely felt any fade at the end of it. And that was only just at the very end of the run.
The Ferodo DS 2500 and Endless SSS pads are amazing and well worth the money!
I only have the OEM pads to compare these to, which are no comparison (duh)
Comment
Comment