fuckkk this is actually incredible!!
Announcement
Collapse
No announcement yet.
Norm - Perth DC5R
Collapse
X
-
Originally posted by 45SET View PostWow... you took the entire front end off... I didn't even remove the radiator!
Hope you are changing that intake manifold. Let me know when you need a hand and I'll run through a few things with you!
I will be using my RRC intake manifold. It will be a k20 top and k24 bottom end. I wont be transplanting the whole k24 in. At this stage I've still got alot of questions, and will need to do my own research. You mentioned in your build blog, that you have the tsx manual? Would you be so kind to somehow forward it to me. I'm not sure whether its possible by email as there is a limit on attachments but you could try. My email is normy_@hotmail.com.
But Robi, when the time comes i'll give you a message. I still need to take the engine out of the donor car and put the engine on a stand a strip it. I will most likely be rebuilding all the internals.
Originally posted by dnapol View Postfuckkk this is actually incredible!!
Norm
Comment
-
Originally posted by Norm View PostI will be using my RRC intake manifold. It will be a k20 top and k24 bottom end. I wont be transplanting the whole k24 in. At this stage I've still got alot of questions, and will need to do my own research. You mentioned in your build blog, that you have the tsx manual? Would you be so kind to somehow forward it to me. I'm not sure whether its possible by email as there is a limit on attachments but you could try. My email is normy_@hotmail.com.
But Robi, when the time comes i'll give you a message. I still need to take the engine out of the donor car and put the engine on a stand a strip it. I will most likely be rebuilding all the internals.
Norm
I've sent you an email with all the paper work I had from my build. It includes:
- RSX manuals
- TSX manuals
- Parts needed for putting a K24 into a DC5.
If you've got any questions, let me know.Last edited by 45SET; 24-06-12, 09:29 PM.
Comment
-
Rims have arrived and have been picked up by my good friend!
Specs. Work Kiwami - Matt Black, 18inch 10.5 width +23 offset. And Alex, I do have a sweet spot for the cr-kai design, but these are alot more concave and aggressive than my original ones. Weight is 10.3kg's from a 22.8 lbs conversion.
More info can be found on http://www.work-wheels.net/products/...=7&Item_id=126Last edited by Norm; 15-07-12, 02:21 AM.
Comment
-
Originally posted by Stephen_AUS View PostKiwami's are so nice, and I am assuming 10.5 width, since it says 0.5 width ? What are your tyre specs you gonna run and what tyres ?
Comment
Comment