Hi guys,
for those of you that don't know me, the names Nathan, and over the next 18 months there should be a bit going on with my car, so i thought i should finally start up a build thread.
As a bit of background, i've always been a honda guy, starting with an 83' accord, 92' eg si civic, 98' ek4 civic and in 06' i picked up my 04' dc5r with 26,000 km's on it.
From then the car was used as a daily driver, so due to that, and other commitments, mods were kept pretty light on.
Then due to an expanding family, in may last year i bought an 07' crv lux in nighthawk black and the dc5 became the weekend warrior i always had intended it to be
and the car now sits on 74,000 km's
Over the last few years though, i have been stockpileing parts for my build and over the next 12 months i hope to get all the drivetrain and engine work done and decide from there where to with the car. I'm very keen to add a ap1 to the garage so funds may have to be diverted towards that soon.
My aim for the car is really just to build a bit of a allrounder, it will see a little 1/4mile, a little track, and a fair bit of hardparking in between.
will try and update with some fresh photos when i get a chance,
thanks for reading,
Nathan
Mods include:
Engine and transmission:
-J' racing intake
-Spoon oil cap
-Spoon radiatior cap
-M-tec 'race' tranmission springs
-Buddyclub short shifter
-Mugen engine mounts(front three)
-Hasport 62a rear engine mount
-ASP 'small tube' header and high flow cat
Suspension:
-Buddyclub N+ coilovers
-Skunk2 rear control arms
-Skunk2 rear camber arms
-Skunk2 rear tie bar
-Eibach front sway bar 25mm
-Eibach rear sway bar 23mm
-Mugen front tower bar
-Mugen rear tower bar
Brakes:
-Mugen active gate front rotors
-Spoon front pads
-Spoon rear pads
-Goodridge braided lines
-Motul rbf600 fluid
Interior:
-Spoon rear vision mirror glass
-Skunk2 shift knob
-Jdm oem starter button
Exterior:
-Spoon hydra-blue mirror glass
-Mugen(genuine) rear wing
-Piaa extreme white parker & low beam bulbs
-Hella xenon yellow hi beam bulbs
-Rear wiper delete
-Rear 'type-r' & 'integra' badge delete
Wheels and tyres:
-Stock rims with toyo ra-1
-Mugen heptagon lug nuts
Mods in the shed(not yet fitted to car):
-Drag cartel 2.2 camshafts
-Spoon 5.1 final drive
-Spoon clutch line
-Spoon ridgid collar kit
-Spoon valve cover
-Spoon magnetic sump/tranny plugs
-Skunk2 pro series intake manifold
-Skunk2 70mm throttle body
-Skunk2 fuel rail
-Skunk2 pro series valve springs
-Skunk2 titanium retainers
-Skunk2 valve cover hardware kit
-Syncrotech carbon lined syncros
-Mugen baffled sump
-Mugen oil filters
-Mugen side skirts
-Mugen rear lip
-Toda clutch/flywheel kit(non asbestos)
-Toda timing chain tensioner
-K-tuned coil pack cover
-K-tuned billet tps sensor
-Buddyclub roll centre adjusting ball joints
-Buddyclub carbon fibre bonnet
-Aerocatch hood latches
-Jdm rear bar
-Rdx 410cc injectors & clips
-Todds modified oem tie rods
-PCI front spherical bearing kit
[IMG]
[/IMG]
[IMG]
[/IMG]
for those of you that don't know me, the names Nathan, and over the next 18 months there should be a bit going on with my car, so i thought i should finally start up a build thread.
As a bit of background, i've always been a honda guy, starting with an 83' accord, 92' eg si civic, 98' ek4 civic and in 06' i picked up my 04' dc5r with 26,000 km's on it.
From then the car was used as a daily driver, so due to that, and other commitments, mods were kept pretty light on.
Then due to an expanding family, in may last year i bought an 07' crv lux in nighthawk black and the dc5 became the weekend warrior i always had intended it to be
and the car now sits on 74,000 km'sOver the last few years though, i have been stockpileing parts for my build and over the next 12 months i hope to get all the drivetrain and engine work done and decide from there where to with the car. I'm very keen to add a ap1 to the garage so funds may have to be diverted towards that soon.
My aim for the car is really just to build a bit of a allrounder, it will see a little 1/4mile, a little track, and a fair bit of hardparking in between.
will try and update with some fresh photos when i get a chance,
thanks for reading,
Nathan
Mods include:
Engine and transmission:
-J' racing intake
-Spoon oil cap
-Spoon radiatior cap
-M-tec 'race' tranmission springs
-Buddyclub short shifter
-Mugen engine mounts(front three)
-Hasport 62a rear engine mount
-ASP 'small tube' header and high flow cat
Suspension:
-Buddyclub N+ coilovers
-Skunk2 rear control arms
-Skunk2 rear camber arms
-Skunk2 rear tie bar
-Eibach front sway bar 25mm
-Eibach rear sway bar 23mm
-Mugen front tower bar
-Mugen rear tower bar
Brakes:
-Mugen active gate front rotors
-Spoon front pads
-Spoon rear pads
-Goodridge braided lines
-Motul rbf600 fluid
Interior:
-Spoon rear vision mirror glass
-Skunk2 shift knob
-Jdm oem starter button
Exterior:
-Spoon hydra-blue mirror glass
-Mugen(genuine) rear wing
-Piaa extreme white parker & low beam bulbs
-Hella xenon yellow hi beam bulbs
-Rear wiper delete
-Rear 'type-r' & 'integra' badge delete
Wheels and tyres:
-Stock rims with toyo ra-1
-Mugen heptagon lug nuts
Mods in the shed(not yet fitted to car):
-Drag cartel 2.2 camshafts
-Spoon 5.1 final drive
-Spoon clutch line
-Spoon ridgid collar kit
-Spoon valve cover
-Spoon magnetic sump/tranny plugs
-Skunk2 pro series intake manifold
-Skunk2 70mm throttle body
-Skunk2 fuel rail
-Skunk2 pro series valve springs
-Skunk2 titanium retainers
-Skunk2 valve cover hardware kit
-Syncrotech carbon lined syncros
-Mugen baffled sump
-Mugen oil filters
-Mugen side skirts
-Mugen rear lip
-Toda clutch/flywheel kit(non asbestos)
-Toda timing chain tensioner
-K-tuned coil pack cover
-K-tuned billet tps sensor
-Buddyclub roll centre adjusting ball joints
-Buddyclub carbon fibre bonnet
-Aerocatch hood latches
-Jdm rear bar
-Rdx 410cc injectors & clips
-Todds modified oem tie rods
-PCI front spherical bearing kit
[IMG]
[/IMG][IMG]
[/IMG]
same name as me 
right now
Comment