i am looking at getting a vision oil catch can for dc2r. anyone here have experience with these? suggestions? are they easy to install? is cusco or greddy better? (i hear theyre a bit smaller than the vision?)..where do they plug in?
Announcement
Collapse
No announcement yet.
oil catch can
Collapse
X
-
I have a $30 one from eBay and it works just as well as those mega expensive ones.
Do a search (or wait for Tanghy) on honda-tech.com on oil catch can, and look for an image that someone hand wrote on a paper towel with instructions on how the catch can should be connected.I am a lesbian trapped inside a male body
-
I believe Catch cans help alot for track.
It caught a fair bit of dirty oil in the can from going back into the engine (combustion chambers?)
I do know some people have hooked up the oil cans incorrectly.
They hook it to the rocker cover and intake pipe which is incorrect.
Hmm, need to find that diagram.
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horse power is how fast you hit the wall, torque is how far you take the wall with you."
Comment
-
Well it was about 2 cms of oil in a cusco catch can after about 40-50 laps
So i wouldnt say it was excessive.
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horse power is how fast you hit the wall, torque is how far you take the wall with you."
Comment
-
WTF not asingle drop?
Did you hook it up correctly?
have pics of installation of your catchcan Noel?
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horse power is how fast you hit the wall, torque is how far you take the wall with you."
Comment
Comment