jdm wheels dc5

[kovdc5r]

you would need 15mm spacers on each wheel, so you will need to go with either extended lug nuts, or the H&R spacers to be on the safe side.

i know this pic doesnt have the JDM dc5r wheels, but its somewhat close. 17" on stock ride height. hope jon doesnt mind me posting his car

cheers appreciate the feedback!

[TeMp]

This is how mine look with stock springs.....didn't turn out too bad.....just recently fit with tein sussy......you need spacers to make the correct offset....I am currently using 5mm spacers at rear....may fit 15mm later to see whether it looks better....
http://img239.imageshack.us/img239/6392/dsc00287hp4.jpg

Eddie,

It is illegal to have more than 10mm spacer.

[kovdc5r]

either that or..
buy JDM lower control arms and brembo setup

i WISH

[kovdc5r]

Eddie,

It is illegal to have more than 10mm spacer.

yea i had feeling it was illegal

[andrew84tran]

arent spacers dangerous tho? dun they put more stress on the threads

[Manny]

Hence the need for extended lugs as well...

[MrThanh]

i thought it was illegal to even have spacers at all.

[kovdc5r]

i thought it was illegal to even have spacers at all.

hhm i think you are right but which copper is really going to kno whether people are using spacers

[air23box]

I got pull over once but the cop didn't really look at my wheels at all...coz they looks stock I reckon....
TEMP....I know its illgeal but can't affort JDM front and rear setup atm.....lol

[hebe]

i thought it was illegal to even have spacers at all.

Yes it is...not sure in other states but in NSW yes

[cldc2]

hhm i think you are right but which copper is really going to kno whether people are using spacers

if your hubs are brown, spacers are grey and rims are white.

[kovdc5r]

if your hubs are brown, spacers are grey and rims are white.

HAHA maybe but i think the coppers will be too busy worrying about donuts!

[sangers]

u only need hubs/rotors/knuckles for the rear, not the upper control arms.

for the front you need lower control arms/hubs/rotors/knuckles/front sway bar/calipers

rear calipers you can reuse and brake lines you can reuse.

[kovdc5r]

u only need hubs/rotors/knuckles for the rear, not the upper control arms.

for the front you need lower control arms/hubs/rotors/knuckles/front sway bar/calipers

rear calipers you can reuse and brake lines you can reuse.

might as well buy some type s wheels from honda instead of getting jdm set up done would be cheaper! But honda quoted $2400 for 4 wheels

sags did your wheels bolt up with out any probs unlike the jdm wheels? i would think they would as the type s doesnt run brembos??

[Jingers]

"Sags" does not have a type-s

he has a dc5 with the jdm lca/knuckle ie ie conversion