Announcement

Collapse
No announcement yet.

DC5R : AUDM vs JDM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I took this a lil while back, comparo of an AUDM Type-R/Type-S header next to a JDM Type-R header. The pipe diameter is about 4mm bigger on the JDM one if i remember correctly.

    Comment


      #32
      looks like the construction material is different too. stainless vs mild?

      thanks for the comparison pic btw!
      00-0138 ITR

      Comment


        #33
        Originally posted by Chi View Post
        DC5R engine and EP3R engine in japan are the same.

        Only the headers and exhaust are slightly different, which is the difference in the slight power difference.
        Originally posted by PolitoHood View Post
        What's the difference in the header????
        Originally posted by white_r View Post
        can anyone clarify this?
        Good info from everyone above, but white_r actually seems to be asking for info on the difference between the JDM DC5R header and the JDM EP3R header. Does anyone actually know if there is a difference? They look pretty much the same in all the pictures I have seen.

        Comment


          #34
          JDM DC5R and JDM EP3R header are the same as far as i know. The ones in that pic were off a DC5

          Comment


            #35
            Originally posted by Nighthawk_S View Post
            I took this a lil while back, comparo of an AUDM Type-R/Type-S header next to a JDM Type-R header. The pipe diameter is about 4mm bigger on the JDM one if i remember correctly.

            Does anyone know what size donut gasket is needed for the JDM header?? (I'm referring to the donut gasket that would be in the middle of the spring bolts)

            Comment


              #36
              Hi all,

              Comparing JDM and AUDM body shells, what is the main differences?

              Front ends appear to be the same except for JDM Projector Headlights for HIDs.
              JDM has folding mirrors as opposed to AUDM
              JDM rear bar has smaller number plate area.
              JDM wheels are 17" and have less offset.

              What about front bumper and front lip and rear lip?
              Wakefield: EG B18CR - R888 - 1.09.9
              Eastern Creek: DC5R - RE001/ER300 - 2.00.8
              Winton: DC5R - RE001 - 1.45.9

              Comment


                #37
                JDM head lights are not projectors. They are still reflector type but the difference is the reflector is designed for HID with a clearer cut off.

                Comment


                  #38
                  Jdm wheels are 10mm higher offset, but their hubs push out an extra 15mm.

                  Another thing i noticed are the door handles (inside) are slightly different.. The angle is off, i changed to type r door inserts and for ones from japan, luckkily it came with handles also
                  Integra Type R
                  Integra Type S
                  S2000

                  Comment

                  Working...
                  X