my ride...

[DrTran]

they are showing 3499 for a small t3/t04e turbo and you will also need fuel pump witch is about another 300 so lets say roughly about 4k for the basic stuff witch is about 6250 australian. not including kpro and tuning. are you planning to diy it or take it to a shop? how much power you want to make and are you going to build your bottom end?

[03DC5R]

with peakboost you choose your turbo, if i go ahead with this build ill go with a gt3782r and it wont change the price of the package. and as for the block im thinking of sending off my block to ERL performance in the US to get it sleaved and get forged internals, as this will again save me a lot instead of doing it all here in aus. i still have alot of time to think about exactly what im doing but above are some options im considering...

edit. i already have the ecu

[DrTran]

if your planning to actually build your block then you should be fine. It gets to be a huge money pit after a while and often times with kits something might not fit properly on the kit so it has to be modified. On my set up I'm using pauter rods and weisco pistons w/ golden eagle sleeves. and for my head work I had it pnp w/ supertech valves and valves springs and crower retainers and just running stock ITR cams.

[03DC5R]

oh ok, well my head is basically already done with the supertech valves/valve springs and toda spec c cams. if i go ahead with the ERL block, it will come wit erl sleevs, manly rods, JE pistons and all the bearings (some ACL some Calico). what car do u drive btw DrTran?

[DrTran]

I have a db8. have you thought about using stock honda berings. not alot of shops where i live use acl anymore stock works better for some reason.

[03DC5R]

update...just bought new wheels. will post up pics tomorrow!

[03DC5R]

[bungsai]

damn! thats different

[mini_s2000]

hey!!!! i love them... same wheels as me! are they a 35 offset?

[Didz]

def not a 44 :P

[03DC5R]

17x9.5 +38 in the front, 17x8 +35 in the rear....needs a wheel allignment asap and guard roll in the back...also nee to source some shorter springs for my flex...just not low enough

[Didz]

get more camber :P

[03DC5R]

yeh, getting the wheel allignment done on mon, will add some negative camber to the rears, and lower the rears by about 5ml lol, then my coilovers will be at their lowest setting...

[ChargeR]

Looks good . White wheels are awesome. What tyre sizes?

get more camber :P

Get less hypocritical.

[03DC5R]

thanks man, nothing compared to yours....sizes are 235/45 at the front, and 225/45 at the rears