JDM DC2R K-Swap Project Car

[eLtrix]

Started to strip my interior harness wire! Need help on a few things if anyone can!

https://drive.google.com/file/d/0Bwr...it?usp=sharing
https://drive.google.com/file/d/0Bwr...it?usp=sharing

Would anyone know what these plugs plug into? The first pic is from the front driver side, part of the headlight loom.
I have a feeling this one is for the radiator fan possibly and horn?
Second pic is of the passenger side, part of the headlight loom also!
For this I think it is front and rear washer motor and AC.

EDIT:

Also for this third pic if anyone know what these 4 plugs are for.
https://drive.google.com/file/d/0Bwr...it?usp=sharing

Wondering what the brown and grey plugs into. The green has 2 small blue connectors inside and the grey plug that is strapped onto the wiring loom.

I have a feeling that one of these plug into the ac or blower kind of thing thats under the dash. These plug lie roughly just under the glove box near the ecu plugs!

EDIT2:

1.https://drive.google.com/file/d/0Bwr...it?usp=sharing
Rough Location: Driver sides strut tower.
Comments: I know the big connector goes to the engine loom harness but what are the other two?

2.https://drive.google.com/file/d/0Bwr...it?usp=sharing
Rough Location: Under driver side dash, near the fuse box.
Comments: I'm assuming the orange is for ABS but not sure about the other three again for this set.

3. https://drive.google.com/file/d/0Bwr...it?usp=sharing
Rough Location: Same as number 2, under the driver side dash
Comments: . Connected to the fuse dash set of wires.

4. https://drive.google.com/file/d/0Bwr...it?usp=sharing
Rough Location: No Idea
Comments: No idea what this is for. Found it extra wondering what this extra loom is for.

5. https://drive.google.com/file/d/0Bwr...it?usp=sharing
Rough Location: Under driver side dash, near the fuse box. Part of the interior harness.
Comments: No idea what this is for.

[eLtrix]

It's been quite some time since I've done an update and thought it's about time I did since quite a few things have been done.

Firstly I've sorted out all my wiring issues and did a completely wire tuck. Routed the headlight loom and such into the fenders. Stripped out and de-pinned all the plugs I didn't need for the k-swap such as the A/C, heater, blower motor, stereo, clock, side mirror adjusters and a the speakers.

After that when we took off the existing brakes we found that the previous owner had broken off the hard break line that runs from the prop valve to the rear. So recently acquired one of those for a dc2r wreck, dropped the subframe and changed the lines over. While we took the brakes off we took off all suspension parts, to get new bushings pressed in! Thanks to a fellow clubitr member got a hard race bushing kit for the dc2r and got the front LCAs, front compliance arms, rear lca, rear toe arms and rear trailing arm. Hopefully the car will feel a lot better with brand new bushings!

While I was in the process of doing all this suspension work I thought I may as well finish off the rest since I found great bargain on these... I bought hard race front and rear camber arms AND zeal function x coil overs. These however have not been installed yet but will be soon hopefully!

That's it about this stage as I'm doing this very slowly when I get some spare time! Hopefully will get pictures up of anything I can soon!