Tiana's Type!

[mountfranklin]

DIYing your car is probably the best feeling ever. my baby is my first car ive ever modded and out shit in myself. theres a first for everything and yea it will take hours. best feeling though when your finished. wish my missus was into cars aswell

[Shaun]

The Hybrid Fuel Rail is sick, one of my favourite things on my car.

Just make sure you use a proper fuel safe thread sealant on all fittings. Fuel leaks are bad

[Tiana]

DIYing your car is probably the best feeling ever. my baby is my first car ive ever modded and out shit in myself. theres a first for everything and yea it will take hours. best feeling though when your finished. wish my missus was into cars aswell

I definitely can agree with you. As I said earlier, its literally becoming my life and working on it being my career!

The hours are relentless, I couldnt agree with you more! Its amazing accomplishing a final product.

You should get her into cars! Its addictive. Once she starts she wont stop!

[Tiana]

The Hybrid Fuel Rail is sick, one of my favourite things on my car.

Just make sure you use a proper fuel safe thread sealant on all fittings. Fuel leaks are bad

Thanks (:
Yeah im picking up all the proper fittings from jdmyard within the week. Cant fit it until then! Also getting the gauge that mounts on the front of the rail.
Connecting it to original fuel lines until I get a Hondata ECU and a tune!

[Norm]

As Shaun says, get some fuel thread sealant. Its not 100% guarantee, however it will aid the fitting process. Keep in mind the gauage is tapered most likely and will get tighter and tighter once fitted to the fuel rail.

[Tiana]

As Shaun says, get some fuel thread sealant. Its not 100% guarantee, however it will aid the fitting process. Keep in mind the gauage is tapered most likely and will get tighter and tighter once fitted to the fuel rail.

Will do, thanks for le helpful tips guys! Will be showing the process soon

[Tiana]

Hey guys! Just a quick little update. Took bumper off last night and just gave my cold air a good clean

[mountfranklin]

haha dont think she will ever be. i had greddy exhaust think it was bout 70mm's that thing roared awesomeness and she hated it. everytime i went to pick her up she would listen to her ipod and shit looooooooooooooooooooooooooooooooooooooooooooollll llllllllllllllll and not only that i had to change the exhaust.. not initially for her but lets just say she had good timing because i had to change it anyways due to loss of license thats coming up for 6 months haha

[Tiana]

haha dont think she will ever be. i had greddy exhaust think it was bout 70mm's that thing roared awesomeness and she hated it. everytime i went to pick her up she would listen to her ipod and shit looooooooooooooooooooooooooooooooooooooooooooollll llllllllllllllll and not only that i had to change the exhaust.. not initially for her but lets just say she had good timing because i had to change it anyways due to loss of license thats coming up for 6 months haha

Girls will be girls I guess! Im just the odd ball tbh!

Good ol' loss of license hey?
I know the feeling. Im coming out of my suspension in 5 days and counting. Never again. But I guess you could see it as an opportunity to do heaps of work to the car? As did I

[mountfranklin]

Girls will be girls I guess! Im just the odd ball tbh!

Good ol' loss of license hey?
I know the feeling. Im coming out of my suspension in 5 days and counting. Never again. But I guess you could see it as an opportunity to do heaps of work to the car? As did I

farr how long were you suspended for? yeah youre right about that gives me more time to work on the car and hopefully by then make a bulid thread when its completed. i still need get my manifold installed and throttle body upgrade then go for a tune with the krpo v3 i got sitting in my car fml and have my rotors changed, brake pads upgraded and braided brake lines installed then its DONE! im ready for the track haha. may need some tie rodds though after i pick up my rims this weekend (hopefully haha).

[ZIPPIE Type-S]

Nice Teg Tiana.

Been thinking of doing my bonnet in carbon wrap,
is it hard to apply such a large piece??

[Tiana]

farr how long were you suspended for? yeah youre right about that gives me more time to work on the car and hopefully by then make a bulid thread when its completed. i still need get my manifold installed and throttle body upgrade then go for a tune with the krpo v3 i got sitting in my car fml and have my rotors changed, brake pads upgraded and braided brake lines installed then its DONE! im ready for the track haha. may need some tie rodds though after i pick up my rims this weekend (hopefully haha).

I lost my license for 3 months. Its so not worth it. Hence all the energy and time put into eventually tracking this car.. slow process but that's what happens when you're studying full time!

Sounds like a great plan. There's endless possibilities when it comes to engine mods. Be sure to keep me posted if you start any build threads!

Nice Teg Tiana.

Been thinking of doing my bonnet in carbon wrap,
is it hard to apply such a large piece??

It took me 3-4 hours and its merely impossible without a second person helping hold the wrap whilst you flatten it down with an applicator pad.

The nose dive has to be one of thee most complicated sections of the bonnets.
I found out theres a method with water. If I knew, I would've done it like that. Im presuming I did it the hard way.

Overall I definitely recommend you doing it if you have patience. The end result is absolutely awesome. Mind you, its cheap as well! If you buy the autotecnica brands wrap 1.52x1.52, you ultimately only pay $50.

I wish I knew about diy threads back then I would've posted one on wrapping bonnets!

[mountfranklin]

yeah definately will! omg im trying to source some modifield tie rods and a rear camber kit now... just to run 17x9 +22 zzzzz mo problems mo moneyyyyyyyyyy

[Tiana]

yeah definately will! omg im trying to source some modifield tie rods and a rear camber kit now... just to run 17x9 +22 zzzzz mo problems mo moneyyyyyyyyyy

Not a huge fan of camber kits. I dont know why. They definitely look great but I dont like the idea of wearing out tyres unevenly. The most I would do is stretched tyres, spacers and rolled guards if anything!

[Hau]

Not a huge fan of camber kits. I dont know why. They definitely look great but I dont like the idea of wearing out tyres unevenly. The most I would do is stretched tyres, spacers and rolled guards if anything!

Camber actually helps the car handle better when taking a corner as you get more tyre to tarmac. Stretched tyres handles like crap. I would rather run camber and fit decent size tyres than run stretched tyres. I've ran stretched tyres on my te37 and they were re001 they didnt handle as well as i liked. Just my opinion anyway.