Does this belong? Ryan's new whip, Project TOPLESS

[gunpoons]

Awesome choice, Alex is right, I bit of low and it will be ace👍

[felixR]

Perfect rims!

[plAythiNG]

What sie tyres Ryan - 245/40?

[Toddxxx]

You bought them! haha
Looks good man. Will look so good once lowered

[ryry668]

Awesome choice, Alex is right, I bit of low and it will be ace

Thanks! Yeah once coils are in, it'll look shmick hehe

Perfect rims!

Thanks boss!

What size tyres Ryan - 245/40?

Yep 245/40. When these go, will opt for 255. Just testing the waters. RS3s are sticky as!!

You bought them! haha
Looks good man. Will look so good once lowered

Thanks bru!

[plAythiNG]

RS3's will be worn next month. Cant wait to see the 255/40's on.. nah i think stick wiht 245's. I think you will need some guard mods with 255!

[Toddxxx]

RS3's will be worn next month. Cant wait to see the 255/40's on.. nah i think stick wiht 245's. I think you will need some guard mods with 255!

he will need guard mods with 245s as well if he doesnt want to run crazy camber
rolled flat, relocated bumper tabs with trimming to the rear bar as well
nothing too major

[ryry668]

All my guard work had luckily been prepared by the previous owner hehe. Guards are rolled with a slight pull, and bumper tabs relocated as well.
I plan to run -2 rear and -2.5 front, but if circumstances change then I'll fix that

[plAythiNG]

Haha ryan u got it all planned out. Final drive please.

[Toddxxx]

You're lucky! Mines all stock and I have to do all that to it haha

[ryry668]

Hi guys, long time no post...
Nothing special happening here, so far only 2 changes. Firstly, bought a set of Buddyclub N+ to suit the new wheels and up the appearance a bit. All up took me about 2hrs to install, and another 2hrs to adjust height properly ahaha! The coils did sag a few extra mm after about 2 weeks. Currently sitting at 105mm off the ground. Thinking about whether i should lower the front a touch cos the wheel gap isnt the same right now, but the height of the car is level if you get what I mean.





I will get new pics of the car sitting in it's current position tomorrow. Next update coming up!
Ordered a Berk HFC with Phil, back in Feb...and thank fook it had finally arrived. It was going to be my own bday pressie, but it ended up being belated as haha.







On bum dyno, just with hfc, car pulls more cos its now 70mm, same as catback. Js Racing headers next? haha!
Until next time....peace

[wongy]

Haha, on bum dyno, funny, good choice on coils

[PG_DC5]

2hrs install for coils... what kind of sorcery is this

[ryry668]

Long time no post! first off i would like to show you how my car sits atm.
I ended up lowering the front to even out the wheel gaps as this looked better..hehe



Prior to that photo being taken, I took the time to restore my headlights (. I went to supercheap and autobarn and bought a few sheets of wet/dry, and a Meguiars PlastX headlight polish.

Check out all the chips on it, due to track days from previous owner


Started with 600grit


Then 1000grit


Then 1500grit, and finally a 2000grit.


After using all my elbow grease, applied the headlight polish and buffed it to a clear shine.


before and after haha


Until next time...thanks!

[felixR]

Nice work.

I'm always a little afraid to use sandpaper on the headlights!