NSW Supersprint Championship 2007
NSW SUPERSPRINT CHAMPIONSHIP
CHAMPIONSHIP CALENDAR
2007
4 March - Oran Park Grand Prix
22 April - Eastern Creek
20 May - Wakefield Park
30 June - Oran Park Grand Prix
28 July - Oran Park Grand Prix
5 August - Eastern Creek
16 September - Wakefield Park
14 October - Oran Park South
2 December - Eastern Creek
All cars must comply with the General Requirements of Automobiles Schedules A & B, as specified in the current CAMS Manual, and comply with Types 1, 2, 3, 4, limited 5 and SV, as specified in the CAMS Year 2007 NSW Supersprint Vehicle Type Regulations.
Type 1. Unmodified Production Cars (excluding those vehicles referred to in
Type SV), where the only freedoms relate to safety, engine reconditioning, tyres and some cosmetic items
Type 2. Modified Road-Registered Vehicles (excluding those vehicles referred
to in Type SV), allowing originally available options and limited modifications to engines, suspension and tyres.
Type 3. Competition vehicles based on 3J Club Cars rules as defined in the
CAMS Manual. Minor additional freedoms are allowed to recognise that there will be some road-registered vehicles competing, that cannot meet full 3J rules.
Type 4. 3D Sports Sedans exactly as defined in the CAMS Manual. In addition, any vehicle that conforms to Type 1, 2, 3 or SV requirements shall be permitted to employ or use racing “slicks” but if it does so it shall be
classified as a Type 4 vehicle.
Type 5. Open Wheelers as defined under 1st Category Racing Cars in the
CAMS Manual, and cars which do not conform to Types 1, 2, 3, 4 or
SV, or as classified by the Panel.
Type SV Modified road registered vehicles having modifications in excess of
that allowed in Types 1 and 2 competing on commercially available road tyres. Included in Type SV are all kit cars (Lotus 7 and replicas, Cobras etc) and all cars with Limited Compliance Plates.
MULTIPLICATION FACTORS FOR CAPACITY
For all Vehicle Types, capacity must be calculated on the following basis:
Rotary Engines Multiply displacement by 1.8
Forced Induction Multiply displacement by 1.7
Forced Induction Rotary Multiply displacement by 3.06
PLEASE PM me if you want me to send out the forms, rules etc to you ...
CHAMPIONSHIP CALENDAR
2007
4 March - Oran Park Grand Prix
22 April - Eastern Creek
20 May - Wakefield Park
30 June - Oran Park Grand Prix
28 July - Oran Park Grand Prix
5 August - Eastern Creek
16 September - Wakefield Park
14 October - Oran Park South
2 December - Eastern Creek
All cars must comply with the General Requirements of Automobiles Schedules A & B, as specified in the current CAMS Manual, and comply with Types 1, 2, 3, 4, limited 5 and SV, as specified in the CAMS Year 2007 NSW Supersprint Vehicle Type Regulations.
Type 1. Unmodified Production Cars (excluding those vehicles referred to in
Type SV), where the only freedoms relate to safety, engine reconditioning, tyres and some cosmetic items
Type 2. Modified Road-Registered Vehicles (excluding those vehicles referred
to in Type SV), allowing originally available options and limited modifications to engines, suspension and tyres.
Type 3. Competition vehicles based on 3J Club Cars rules as defined in the
CAMS Manual. Minor additional freedoms are allowed to recognise that there will be some road-registered vehicles competing, that cannot meet full 3J rules.
Type 4. 3D Sports Sedans exactly as defined in the CAMS Manual. In addition, any vehicle that conforms to Type 1, 2, 3 or SV requirements shall be permitted to employ or use racing “slicks” but if it does so it shall be
classified as a Type 4 vehicle.
Type 5. Open Wheelers as defined under 1st Category Racing Cars in the
CAMS Manual, and cars which do not conform to Types 1, 2, 3, 4 or
SV, or as classified by the Panel.
Type SV Modified road registered vehicles having modifications in excess of
that allowed in Types 1 and 2 competing on commercially available road tyres. Included in Type SV are all kit cars (Lotus 7 and replicas, Cobras etc) and all cars with Limited Compliance Plates.
MULTIPLICATION FACTORS FOR CAPACITY
For all Vehicle Types, capacity must be calculated on the following basis:
Rotary Engines Multiply displacement by 1.8
Forced Induction Multiply displacement by 1.7
Forced Induction Rotary Multiply displacement by 3.06
PLEASE PM me if you want me to send out the forms, rules etc to you ...
Comment