Q on Toda header clearing DC5R sway

[JDM-05R]

hey guys


Im looking into getting a toda header for my 5r and just wanting to clarify. Would the audm sway bar need to be changed for clearance? or will it fit without any issues?

Thanks

[Tiu]

yes change to EP3R swaybar.

[iversonruls]

u will need ep3 front sway bar or other aftermarket front sways such as whiteline

[JDM-05R]

thanks for the lighting response. would JDM ep3 sway bar fit? 25mm?

[danielj]

will any aftermarket ones work, or only a select few?

[JDM-05R]

does it have to be jdm ep3r or can it be audm

[ChargeR]

does it have to be jdm ep3r or can it be audm

The AUDM bar will not fit with the Toda header and the JDM DC5R front sway bar will not mate up to the AUDM LCAs.

will any aftermarket ones work, or only a select few?

Any aftermarket item intended for the EP3R should be fine. Not sure about locally made options, I had heard that the Whiteline bar would bang on some JDM headers unless it was set to full stiff. Can anyone confirm?

thanks for the lighting response. would JDM ep3 sway bar fit? 25mm?

The JDM EP3R bar is around 26mm with about 3mm wall thickness I think. Larger diameter than the front bar fitted to the AUDM DC5R.

[jj17]

unless you have jdm dc5r front sway and LCA (brembo) then would it fit?

[thegame-01]

how much is whiteline sway?

[JDM-05R]

The JDM EP3R bar is around 26mm with about 3mm wall thickness I think. Larger diameter than the front bar fitted to the AUDM DC5R.

so the jdm ep3r sway bar will fit 100%?

[bungsai]

90% of the guys that ball on toda run the EP3R swaybar.

rich mofos.

[ChargeR]

so the jdm ep3r sway bar will fit 100%?

It will fit 100% I have fitted this combination myself. No issues at all, just be aware that the EP3R bar is larger diameter than the AUDM one so you will need the bushings that go in the D bracket attached to the sub frame as well as the bar itself. I reused the AUDM D brackets because I misplaced the EP3R ones but I bet they are the same.

how much is whiteline sway?

www.whiteline.com.au

unless you have jdm dc5r front sway and LCA (brembo) then would it fit?

Yeah for sure, it would fit no worries. It is only the Australian and US cars that have the funny shaped swaybar that nothing will fit past.

90% of the guys that ball on toda run the EP3R swaybar.

rich mofos.

[JDM-05R]

It will fit 100% I have fitted this combination myself. No issues at all, just be aware that the EP3R bar is larger diameter than the AUDM one so you will need the bushings that go in the D bracket attached to the sub frame as well as the bar itself. I reused the AUDM D brackets because I misplaced the EP3R ones but I bet they are the same.

thanks man sounds good. ill be using the audm D brackets aswell

cheers