Announcement

Collapse
No announcement yet.

Q on Toda header clearing DC5R sway

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Q on Toda header clearing DC5R sway

    hey guys


    Im looking into getting a toda header for my 5r and just wanting to clarify. Would the audm sway bar need to be changed for clearance? or will it fit without any issues?

    Thanks

    #2
    yes change to EP3R swaybar.
    '03 Integra DC5 Type R
    Naturally Aspirated, K20A i-Vtec

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

    Comment


      #3
      u will need ep3 front sway bar or other aftermarket front sways such as whiteline

      Comment


        #4
        thanks for the lighting response. would JDM ep3 sway bar fit? 25mm?
        Last edited by JDM-05R; 10-05-10, 10:28 AM.

        Comment


          #5
          will any aftermarket ones work, or only a select few?

          Comment


            #6
            does it have to be jdm ep3r or can it be audm

            Comment


              #7
              Originally posted by JDM-05R View Post
              does it have to be jdm ep3r or can it be audm
              The AUDM bar will not fit with the Toda header and the JDM DC5R front sway bar will not mate up to the AUDM LCAs.

              Originally posted by danielj View Post
              will any aftermarket ones work, or only a select few?
              Any aftermarket item intended for the EP3R should be fine. Not sure about locally made options, I had heard that the Whiteline bar would bang on some JDM headers unless it was set to full stiff. Can anyone confirm?

              Originally posted by JDM-05R View Post
              thanks for the lighting response. would JDM ep3 sway bar fit? 25mm?
              The JDM EP3R bar is around 26mm with about 3mm wall thickness I think. Larger diameter than the front bar fitted to the AUDM DC5R.

              Comment


                #8
                unless you have jdm dc5r front sway and LCA (brembo) then would it fit?
                bansai! Ling Longs

                Comment


                  #9
                  how much is whiteline sway?

                  Comment


                    #10
                    Originally posted by ChargeR View Post
                    The JDM EP3R bar is around 26mm with about 3mm wall thickness I think. Larger diameter than the front bar fitted to the AUDM DC5R.
                    so the jdm ep3r sway bar will fit 100%?

                    Comment


                      #11
                      90% of the guys that ball on toda run the EP3R swaybar.

                      rich mofos.

                      Comment


                        #12
                        Originally posted by JDM-05R View Post
                        so the jdm ep3r sway bar will fit 100%?
                        It will fit 100% I have fitted this combination myself. No issues at all, just be aware that the EP3R bar is larger diameter than the AUDM one so you will need the bushings that go in the D bracket attached to the sub frame as well as the bar itself. I reused the AUDM D brackets because I misplaced the EP3R ones but I bet they are the same.

                        Originally posted by thegame-01 View Post
                        how much is whiteline sway?
                        www.whiteline.com.au

                        Originally posted by jj17 View Post
                        unless you have jdm dc5r front sway and LCA (brembo) then would it fit?
                        Yeah for sure, it would fit no worries. It is only the Australian and US cars that have the funny shaped swaybar that nothing will fit past.

                        Originally posted by bungsai View Post
                        90% of the guys that ball on toda run the EP3R swaybar.

                        rich mofos.

                        Comment


                          #13
                          Originally posted by ChargeR View Post
                          It will fit 100% I have fitted this combination myself. No issues at all, just be aware that the EP3R bar is larger diameter than the AUDM one so you will need the bushings that go in the D bracket attached to the sub frame as well as the bar itself. I reused the AUDM D brackets because I misplaced the EP3R ones but I bet they are the same.

                          thanks man sounds good. ill be using the audm D brackets aswell

                          cheers

                          Comment

                          Working...
                          X