Co-incidentally I just took off the set of rims I have been running for the last 1.5 years with -2.8 camber. Struggled to find a pic that fully illustrates the camber wear but please see the following:
If you look closely enough on the right side where the camber wear is, you can see how there is suddenly a sharp slope where as the left hand side is a nice gradual slope down. The photo is dead set in the centre.
This tyres has just been on the track also so you can also see where the most heavily wearing area is and how the camber has influenced this wear.
I'm no baller and to me this camber is substantial especially considering that the RE01R new tread is only 7mm from the tread wear marker.
I don't think Tom was ever on -6 or close to -6 long enough for proper photos.
You will be fine Will. If it doesn't fit initially just add more camber. Camber makes everything work.
If you look closely enough on the right side where the camber wear is, you can see how there is suddenly a sharp slope where as the left hand side is a nice gradual slope down. The photo is dead set in the centre.
This tyres has just been on the track also so you can also see where the most heavily wearing area is and how the camber has influenced this wear.
I'm no baller and to me this camber is substantial especially considering that the RE01R new tread is only 7mm from the tread wear marker.
I don't think Tom was ever on -6 or close to -6 long enough for proper photos.
Originally posted by vuongster
View Post
Comment