Can you use the JDM DC5R K20A cams ( I & E) in the AUDM DC5R K20A using stock valve train ( springs , retainers etc) ?
Will be using Kpro of course with this.
Will be using Kpro of course with this.
-
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horse power is how fast you hit the wall, torque is how far you take the wall with you." -
I think you can. Just that you won't be able to rev it more as AUDM valve not as stiff as JDM. Although one side is actually the same as JDM, can't remember the Intk. side or the Exhst. side -
No point doing this Chi as with that money and little more you can get some aftermarket cams which would give you better bang for the buck.
Unless the king of cheapness pulls off another stuntLast edited by TeMp; 17-04-08, 05:53 PM.Comment
-
Yes I have done this with no problems.Comment
Comment