Originally posted by Timmy_B
View Post
Announcement
Collapse
No announcement yet.
K20/A3 Oil pumps......
Collapse
X
-
"Also, if you delete those balance shafts you'll have an open oil orifice in the main bearing cap #3 on the lower plate. YOU NEED TO REMOVE THE JET AND PLUG THAT HOLE OR YOU WILL HAVE VERY LOW OIL PRESSURE! Here's how! A wood screw and a 12mm honda bolt coated with RTV =)
Put your oil pan back on! You can use the steel one that comes with the K24 if you keep the balance shafts but if you use the type-S oil pump you're going to have to use your aluminum one."
"A small oil port (used on the OE K24 pump also needs to be plugged to prevent loss of vital oil pressure.
Last edited by Timmy_B; 13-02-13, 12:21 PM.
Comment
-
Originally posted by tinkerbell View PostAh, OK - that is plugged in the K20A block by a bolt - so no big deal... i thought you were talking about something else!
and looking at the K20A service manual, the K20A2/3 pumps look the same.
Yeah its blocked in the K20A but will need to be blocked in the K24 if using the K20 pump.
Comment
-
There not call "oil squirters" my bad i assume the wrong thing.
There a c^&t to get out. Goodluck.BYP Racing & Developments
Built. Tuned. Driven
Want to go fast? Come see us! e: jimmy@bypracing.com ph: (02) 9757 4757
Comment
Comment