Camber kits

[tofu]

I have just fitted a set of JDM DC5R wheels onto my TypeS
The rear has some serious negative camber. I am wondering if there would be any problems fitting a rear camber kit onto the +60 offset wheels on a TypeS?

I would think if anything it would reduce/eliminate rubbing.

Anyone suggest a camber kit to use?

[M a i k e r u]

I've been hearing good things about the teins camber kit.

Ask JDM yard!

[Jingers]

jeff it really depends on whether you want to apply negative or postive camber

[air23box]

yeah....I'm running that setup too......once I lower it the wheel is rubbing the inner guard......I got a set of Ingall rear camber kit from zi......drop him a pm....great stuff....

[tofu]

sweet...i need to correct the negative camber in the rear...
but i have looked at many other cars on clubrsx.com that are dropped on
Tein SS as well, but their rear doesn't seem to have so much negative camber...

[kookie]

how much neg camber you running in the rear? i think mines at 2.5 >< need to get that fixed, but then again how low is your car?

[GoldCoastDC5R]

Get the ingalls kit, easy to install and adjust. I had -4deg on the rear prior to install of this kit with coilovers.

Give Zi a yell, i think about $250 + shipping.

[tofu]

how much neg camber you running in the rear? i think mines at 2.5 >< need to get that fixed, but then again how low is your car?

i don't know how much neg camber it is but you can certainly tell from just looking at it..
but as i was taking some photos of my car today i realised that the front also is fairly negatively cambered.

but i guess i can dial that out with a wheel alignment since the Tein SS has front camber adjustments right?

[GoldCoastDC5R]

Front you can adjust via the coil over mounts. Rear you need a camber kit.

[45SET]

i put a set of Tein SS on my car (ride height is set to gaurd just above wheel) and the rear is running -1'.

i have seen whiteline camber kit for the rear.... they retail for just under $100 last time i checked on the site.... and i think this is for 3-4' worth of movement.

i'll be looking into this kit after new years

[sangers]

anyone know of any other options other than ingalls?

[air23box]

JIC
http://www.jic-magic.co.jp/file/product/f_index.html
http://page12.auctions.yahoo.co.jp/jp/auction/p68221109
or Vision

http://www.technicasport.co.jp/jp/kit.htm
http://page3.auctions.yahoo.co.jp/jp/auction/c129925490
but they are acturally the same thing.....

[BF]

Has anyone used the whiteline kit?

[nzitr]

Whiteline kit might just be Ingalls. My Whiteline camber bolts were.

The latest Ingalls rear camber kits look better engineered than the other ones I have seen available.

[tofu]

i put a set of Tein SS on my car (ride height is set to gaurd just above wheel) and the rear is running -1'.

i have seen whiteline camber kit for the rear.... they retail for just under $100 last time i checked on the site.... and i think this is for 3-4' worth of movement.

i'll be looking into this kit after new years

i don't think the whiteline rear camber kit is made the same way as the Ingalls/Vision.
but they do all look the same, so might as well just buy Ingalls.

that JIC camber kit looks awsome tho.