Camber bolts for EP3/DC5

[amee-reb]

hey guys. iv now encountered this problem.. my car is extremely low on the front. HALF a finger gap between tyre and fender while sitting on 17 inch rim with 235/45/17 tyre, meaning i need camber to clear guards (as-well as track purposes). anyway i went to a alignment shop today and asked to get the most camber i can get from my bc coilovers with camber tops. the guy was able to get -1.5ish but was then unable to set the toe right and i had to go back to -0.5. so now tonight after my research i now know i need after market tie rods. however i cant seem to find any DIYs or the right guides to tell me exactly what i need.

is this the part i need?
http://www.speedstar-racing.com/stor...44466051ae2db5

any help will be greatly appreciated. ill have to raise my car in the mean time

[amee-reb]

anyone?

[gunpoons]

Camber bolts for EP3/DC5

Sounds to me like you need a set of todds modified oem tie rods and a set of camber bolts,
The camber bolts will give you the extra camber you need to pull the tyre under the guard and the tie rods will give you the extra adjustment needed to get your toe back to zero,
Problem solvered

[amee-reb]

Sounds to me like you need a set of todds modified oem tie rods and a set of camber bolts,
The camber bolts will give you the extra camber you need to pull the tyre under the guard and the tie rods will give you the extra adjustment needed to get your toe back to zero,
Problem solvered

thanks for the reply! yea i was just confused wether to get the modified tie rods or tie rod ends :/

anyway this is really nooby but where can i find "todds" tie rods. iv been searching for hours and can only fine this brand

http://www.dvrace.com/tierods.html

[ChargeR]

thanks for the reply! yea i was just confused wether to get the modified tie rods or tie rod ends :/

anyway this is really nooby but where can i find "todds" tie rods. iv been searching for hours and can only fine this brand

http://www.dvrace.com/tierods.html

Yep those tie rods in the link are what you need, they're call Todd's because Todd is the username of the guy on ClubRSX that makes them. I wouldn't bother with the tie rod ends you linked earlier. Also half a finger gap with a 235/45 isn't low .

[amee-reb]

Yep those tie rods in the link are what you need, they're call Todd's because Todd is the username of the guy on ClubRSX that makes them. I wouldn't bother with the tie rod ends you linked earlier. Also half a finger gap with a 235/45 isn't low .

ohhhh ok lol famous bloke then! cheers for that answered all my questions. and LOL its the lowest i can go before i cant get up a drive way anymore.. maybe when i get a daily ill go even lower

[npcan2]

You can get the camber bolts from ABR Parts.
http://abrparts.com.au/index.php?id_...oller=category