help HELP help --> plz PLZ plz~!~!

[Mr.R]

I think my left coil is damaged. any good suspension places anyone can suggect im in South/east Melbourne

coils a Zeal Endless, i get a knock noise on my left.. it doesn't feel like its screwed as i went hard on corners, just the knocking sound worries me. Better get it checked ASAP

thank guys

[ChargeR]

Knocking under what circumstances? At speed going over bumps or some other situation?

[noodleman]

check the top bolt and see if it's screw tight

[Chi]

knocking could be many things depending on when it happens.

But from previous experiences.


* lose coilover plates
* tie rod end is loose or faulty
* Steering rack is faulty
* Pillow top mount is faulty
* suspension bits are hitting sumthing aftermarket.
* Loose wheel nuts

[VTECMACHINE]

* lose coilover plates
* tie rod end is loose or faulty
* Steering rack is faulty
* Pillow top mount is faulty
* suspension bits are hitting sumthing aftermarket.
* Loose wheel nuts

Add Strut braces to that list too.

Check to see if all bolts are tight. But It would be good to get it check by a proper mechanic.

[Zakarados]

I Had a knocking noise coming from the left hand side of my car as well. Turned out to be a nut connecting the tie rod to your sussy. I did it up tight but it came back a few days later. I took it into Honda for a warranty repair, they advised they just tightened the sussy and all the bolts, also greased it up. No issues anymore.

[VTECMACHINE]

I recently had an issue with what seemed to me rear right coilovers. We thought it was a wheel bearing... it wasn't that.

Turned out to be the A-arm. The Chassis thread was a tad shread, and was causing the A-arm to move slightly. It was squeeking when when putting lateral load on the wheel. And then hard cornering, it knocked quite loudly. We put lock tight on the bolt, and cleaned up the Chassis thread, and now all seems to be fine.

[freakygeek]

I recently had an issue with what seemed to me rear right coilovers. We thought it was a wheel bearing... it wasn't that.

Turned out to be the A-arm. The Chassis thread was a tad shread, and was causing the A-arm to move slightly. It was squeeking when when putting lateral load on the wheel. And then hard cornering, it knocked quite loudly. We put lock tight on the bolt, and cleaned up the Chassis thread, and now all seems to be fine.

I would helicoil it if possible to be extra sure... but that's just me...

[mugsee]

Another possibility is that the springs are not preloaded enough.

Give the guys down at Tech///Sport a call. Zac maybe a bit ghetto at times, but he knows his stuff and will do a great job on it.

[Mr.R]

thanks guys, wish i could of explained and show you tonight at the garage cafe. all og you have a great night

[Mr.R]

Another possibility is that the springs are not preloaded enough.

Give the guys down at Tech///Sport a call. Zac maybe a bit ghetto at times, but he knows his stuff and will do a great job on it.

hey Michael,

You got there number??? i'll go make a checking

thank you

Regards
Michael

[Mr.R]

Knocking under what circumstances? At speed going over bumps or some other situation?

just driving normal... when a bump come the knocking noise is noticable

[mugsee]

hey Michael,

You got there number??? i'll go make a checking

thank you

Regards
Michael

TECH///SPORT. 4/3 Power Road Bayswater Victoria 3153 Tel. 03 9720 9300

Good luck with it!

[Mr.R]

TECH///SPORT. 4/3 Power Road Bayswater Victoria 3153 Tel. 03 9720 9300

Good luck with it!

MUCH APPRECIATED