Announcement

Collapse
No announcement yet.

Need help finding a front sway bar

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #16
    Originally posted by tofu View Post
    SWEET ChargeR and Chi comes to the rescue again!!
    Chi For Mod
    I'll help you start your mid 2008 campaign

    Nankangs, Better than Your-Mums-Cans

    * Please note, I hate Nankangs.

    Comment

      #17
      Originally posted by ChargeR View Post
      Chi speaks the truth. The lower ball joint on the DC5S is the same size as JDM DC5Rs so the lower control arm will bolt up without a problem.

      My reading suggests that the difference in track width between AUDM and JDM DC5R is in the knuckles and hubs not the LCA.

      haha whoops i meant hub, kept thinkign LCA LCA LCA.



      But Tom knew what i meant.



      "Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
      Horse power is how fast you hit the wall, torque is how far you take the wall with you."

      Comment

        #18
        Originally posted by Chi View Post
        IF you get the JDM LCA you can use the JDM front DC5R sway bar.

        Save weight as well from the lighter LCA's w00t
        i am running that setup - direct bolt on...

        basically gives you a little more "free" neg camber coz the lca's are a little longer.

        jdm dc5r front sway is 25.4mm vs dc5s 26.5mm

        Comment

          #19
          Originally posted by 05dc5S View Post
          i am running that setup - direct bolt on...

          basically gives you a little more "free" neg camber coz the lca's are a little longer.

          jdm dc5r front sway is 25.4mm vs dc5s 26.5mm
          Did you actually measure the LCA? Care to provide the measurements? This has been cause of some contention between myself and a friend.

          Comment

            #20
            Originally posted by ChargeR View Post
            Did you actually measure the LCA? Care to provide the measurements? This has been cause of some contention between myself and a friend.
            From memory the jdm lca is about 5-10mm longer...

            Maybe Adrian from Toda and clarify as he has/had this set up as well

            Comment

            Previous 1 2 template Next
            Working...
            X