my ride...

[03DC5R]

all khumo escata tires, all fitted correctly....i think its something to do with the staggered offsets and widths. cause on the stockies it doesnt seem to have that problem. like right now, its awesome in cornering but in the straights its a bitch to control...weired

[m0nty]

You haven't specified toe in or out. Minimal front camber could also mean a change in geometry under WOT when the front lifts, especially with the extra power your car has.

[03DC5R]

its toe in...ill try it out with the rears stiffened up to minimize the front lifting...

[zeth_an]

Hard to keep straight as in tram lining on some roads or hard to keep straight all the time?

[03DC5R]

ok, found the problem myself just then lol. when i told the wheel allignment place to check the tire pressures, they said they and that they're all good. went to the servo and checked it out...fronts where 48 and 43 psi, the rears were the same. so i put them down to 35 psi all around and its alot better now...if you want something done right, do it yourself lol.

also took her in to get a few dents out, and deleted the rear wiper and that number plate mount...looks ALOT cleaner now. will post pics when i have time...

[Didz]

there u go mate, tyre pressures are everything

[03DC5R]

just bought a Nikon D80...here are the first pics i took...not that happy with them, need more practice...

no more ugly number plate mount:




no more rear wiper:




close up of the nt03's in satin black:

[TypeSexy]

nice car mate.


Did you just get rid of the mount and screw ur plate onto the bumper?

[dr.k20z1]

looks sexy

[03DC5R]

nice car mate.


Did you just get rid of the mount and screw ur plate onto the bumper?

pretty much man...didn't do it my self ofcourse...would of put it on there crooked and offcentre lol

looks sexy

thanks bud

[45SET]

looking very good man... that black does look good.

Are those KU31's or KU36's?

[zeth_an]

Nice car and the NT goes really well with the car I reckon!

I used to have a crush on that wheel.. lol

[gunpoons]

how did you delete the rear wiper? did you use one of the genuine honda plug kits that you can pick up on ebay?

[03DC5R]

looking very good man... that black does look good.

Are those KU31's or KU36's?

thanks mate. no idea, they came with the wheels...all it says on them is kumho escata spt...as soon as they wear out ill be switching back to re001's

Nice car and the NT goes really well with the car I reckon!

I used to have a crush on that wheel.. lol

thanks mate

how did you delete the rear wiper? did you use one of the genuine honda plug kits that you can pick up on ebay?

no, i didnt use the honda plug...just a plug from clark rubber lol

[03DC5R]

photos compliments of Dr Honda (aka king of k series lol)...

K24 block, honed to 87.5mm (2.5L)






BDL 70mm T/B, forged pistons (12.5:1 CR), forged rods, rod bolts







more pics to come