Hi guys, just want to share my DC2 Integra Type R built from Melbourne
This is when I first saw the car. The paint condition wasn't that good coz the car was kept outside under the sunlight for 10 years. The engine bay was even worse than the paint, i could see all the oil grease and spider webs in it.
So the first thing i did was cleaning my engine bay
here is the engine bay before and after several hours of cleaning it with degreaser and steam cleaner.
bought new red badge since the old one was fading, dc2r matts, jdm side indicator and the JDM tyre rx pedals
With Optional Rear Pod that i bought before i got the car.
After severeal months looking for wheels, I finally found a set of Re30 (16x7 et42) in perfect condition! Like brand new!
It's now the time to give the paint a good treatment. Cut and polish with Meguiars Ultimate Compound and Ultimate Polish with 3 layers of collinite No.915 wax.
And here is the result of 14 hours of hardwork
The headlight, before and after
BC BR coilovers arrived together with Hardrace camber arm
Bought the Jdm Concept x J's Racing Exhaust that fit straight to AUDM dc2r
I decided to get wider wheels and here they are!! Mag Blue TE37 16x8 et38 and 16x7 et25
Found out that my control was bend and need to be replaced.. So i bought the Hard Race's front LCA
https://fbcdn-sphotos-f-a.akamaihd.n...19264912_o.jpg
After 2 Years owning the car.. Finally i got the chance to rebuild my engine! =)
More update on page 2
http://forum.clubitr.com.au/showthre...Red-DC2R/page2
Next project:
Mugen CAI
Toda header and rm01 cat
Engine rebuild (On Progress)
This is when I first saw the car. The paint condition wasn't that good coz the car was kept outside under the sunlight for 10 years. The engine bay was even worse than the paint, i could see all the oil grease and spider webs in it.
So the first thing i did was cleaning my engine bay
here is the engine bay before and after several hours of cleaning it with degreaser and steam cleaner.
bought new red badge since the old one was fading, dc2r matts, jdm side indicator and the JDM tyre rx pedals
With Optional Rear Pod that i bought before i got the car.
After severeal months looking for wheels, I finally found a set of Re30 (16x7 et42) in perfect condition! Like brand new!
It's now the time to give the paint a good treatment. Cut and polish with Meguiars Ultimate Compound and Ultimate Polish with 3 layers of collinite No.915 wax.
And here is the result of 14 hours of hardwork
The headlight, before and after
BC BR coilovers arrived together with Hardrace camber arm
Bought the Jdm Concept x J's Racing Exhaust that fit straight to AUDM dc2r
I decided to get wider wheels and here they are!! Mag Blue TE37 16x8 et38 and 16x7 et25
Found out that my control was bend and need to be replaced.. So i bought the Hard Race's front LCA
https://fbcdn-sphotos-f-a.akamaihd.n...19264912_o.jpg
After 2 Years owning the car.. Finally i got the chance to rebuild my engine! =)
More update on page 2
http://forum.clubitr.com.au/showthre...Red-DC2R/page2
Next project:
Mugen CAI
Toda header and rm01 cat
Engine rebuild (On Progress)
Comment