track set up

[cartoon]

Guys,

Was wondering if you have any info and heights and damper settings for a dc2 running buddyclub N+. rear is fully stripped, most of the car is stock. its a GSI running type r running gear and im taking her to wakie

Thanks guys

[Samm928]

badasss mofo.

rear is abit light. maybe leave your spare tyre in there or something.

fyi. can you get me cheap tint jobs ?

[tinkerbell]

Guys,

Was wondering if you have any info and heights and damper settings for a dc2 running buddyclub N+. rear is fully stripped, most of the car is stock. its a GSI running type r running gear and im taking her to wakie

Thanks guys

what rear sway bar?

[cartoon]

Samm,

Call ground zero tinting, tell him u know Fielding

Tinkerbell,
All my sway bars are type R , running the ASR to with a xbrace in the boot and a 3 point chassise brace in the front.

[tinkerbell]

so you wanna know what height to set the coil-overs?

try 35mm trim height at front & 25mm trim height at the rear - depends on your rims i guess?

front damper should be started at 75% full and rears at 30% full... once you have done sufficient laps to determine how the car is behaving, then work on the rear damper setting to tune the oversteer in or out....

this is one of MANY ways to approach it!

[cartoon]

rims are 15" wraped in 195/55/15
Im just after a starting point and a good indication of what hights to run mainly.

Im not running roll centre adjusters or a camber kit yet so i know im rather limited to the height adjustment even though i have adjustable coilovers

[tinkerbell]

well, try 2 fingers gap front, 1 finger gap rear...