Announcement

Collapse
No announcement yet.

◄◄◄◄ The Wheel Fitment Thread ►►►►

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by DaRKNT View Post
    How would I go fitting 17x7 +38 on stock DC5-S suspension? I doubt an extra 7mm will sit outside the guards?

    Not an aggressive fitment.
    that should fit just fine. as you said, it isn't aggressive at all. I doubt you'll be needing guard mods with those specs and especially just on stock sussy.

    Comment


      Originally posted by DaRKNT View Post
      How would I go fitting 17x7 +38 on stock DC5-S suspension? I doubt an extra 7mm will sit outside the guards?

      Not an aggressive fitment.
      Those specs are fine. I was running 17x7.5 +33 without any modifications at all
      sigpic

      Comment


        Re: ◄◄◄◄ The Wheel Fitment Thread ►►►►

        Cheers for the replies guys. Will hopefully buy the wheels I have in mind then!

        Comment


          ◄◄◄◄ The Wheel Fitment Thread ►►►►

          Sorry for being lazy and not reading through the thread but wondering if 17 X 8, +30 with 235/45/17 will fit on a stock DC5R?

          Thanks!

          Comment


            Stock suspension? Should fit no issues.

            Comment


              ◄◄◄◄ The Wheel Fitment Thread ►►►►

              Yup all stock. Thanks

              Comment


                Originally posted by DC5.Raven View Post
                Sorry for being lazy and not reading through the thread but wondering if 17 X 8, +30 with 235/45/17 will fit on a stock DC5R?

                Thanks!
                I'm running 17 x 8 +31 with 235/40/17 (closer to stock rolling diameter than 45) and only needed my rears guards rolled once the car had been lowered.

                On stock suspension at stock height you will have no issues
                My Dc5s thread

                Comment


                  Just wondering would 17 x 9, +44 wrapped around 225/45/17 fit an EP3R with oem suspension? rear guards have already been rolled!

                  Thanks
                  IG: tonytr

                  Comment


                    Originally posted by iamtonee View Post
                    Just wondering would 17 x 9, +44 wrapped around 225/45/17 fit an EP3R with oem suspension? rear guards have already been rolled!

                    Thanks
                    Not without spacers, they will hit the trailing arm at the rear and probably the strut at the front. You'll need about 10mm spacers to make them work.

                    Comment


                      Originally posted by ChargeR View Post
                      Not without spacers, they will hit the trailing arm at the rear and probably the strut at the front. You'll need about 10mm spacers to make them work.
                      so 10mm spacers front and rears :/
                      IG: tonytr

                      Comment


                        That's right, I wouldn't bother with that size. Try ~+30 for an EP3. +22 is a common 17x9 choice on a DC5, but from my experience it sticks out a bit much on an EP3.

                        Comment


                          Originally posted by M@lew View Post
                          That's right, I wouldn't bother with that size. Try ~+30 for an EP3. +22 is a common 17x9 choice on a DC5, but from my experience it sticks out a bit much on an EP3.
                          let me refer you to Tim's (symphorced) new build thread

                          Comment




                            17x9 +20

                            From memory Tim also agreed it was a bit much? (C'mon Tim back me up here)

                            Comment


                              I'm currently running 17x8 +45 on the rear and its pretty close to the trail arms I would image on 17x9 it will rub.
                              ek9-->ED civic--> eg--> S2K-->JDM DC2R-->EP3

                              Comment


                                ◄◄◄◄ The Wheel Fitment Thread ►►►►

                                Originally posted by M@lew View Post


                                17x9 +20

                                From memory Tim also agreed it was a bit much? (C'mon Tim back me up here)
                                I love it. His gripshiftslide photo is my current wallpaper

                                Comment

                                Working...
                                X