Announcement

Collapse
No announcement yet.

◄◄◄◄ The Wheel Fitment Thread ►►►►

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by ChargeR View Post
    Interesting that you were running out of thread and you still had toe in, usually the Akom ends allow significant negative camber before issues with toe start to arise because they are shorter than the stock ends.

    I don't understand how it is possible that you could get more camber on stock tie rod ends unless all these people with those ricey inverted tie rod ends have been lying about them being shorter.
    Valid point ChargeR. I will need to double check my alignment settings after my coilovers were installed.
    Vivid Blue Integra Type-S
    "When I grow up I want camber like TeamMR."
    sigpic
    itr_***@hotmail.com says: (10:43:08 PM)
    send that cock breath back to the land of the stuffed turkeys

    Comment


      #47
      u can get extra camber and toe from OEM tie rods if u trim them.

      I did that for mine.

      Comment


        #48
        Originally posted by wuism View Post
        u can get extra camber and toe from OEM tie rods if u trim them.

        I did that for mine.
        So effectively you were cutting off thread from the tie rod?

        Care to share how much you cut off and how much camber/toe you achieved?

        Not a bad idea at all considering with the aftermarket tie rod ends you don't screw them all the way in anyways.

        Comment


          #49
          Originally posted by TeMp View Post
          So effectively you were cutting off thread from the tie rod?

          Care to share how much you cut off and how much camber/toe you achieved?

          Not a bad idea at all considering with the aftermarket tie rod ends you don't screw them all the way in anyways.
          Both whtdc2 and myself have performed this modification too. The thread on the tie rod needs to be cut further up also. See this post for more information: LINK

          Comment


            #50
            Originally posted by ChargeR View Post

            Some random EP3
            F: 17x9 +35 with 245/40
            R: 17x9 +35 with 245/40

            What sort of mods would that have needed? I'm intrigued.

            Comment


              #51
              Originally posted by yagami View Post
              What sort of mods would that have needed? I'm intrigued.
              It would have needed -2 to -3 degrees of camber front and rear and rolled guards. If you run a smaller 235/40 tyre you would be able to run lower than that car with less camber .

              Comment


                #52
                Originally posted by ChargeR View Post
                It would have needed -2 to -3 degrees of camber front and rear and rolled guards. If you run a smaller 235/40 tyre you would be able to run lower than that car with less camber .
                Sweet! Thanks for the info ChargeR! =D

                Comment


                  #53
                  only tie rod end was cut shorter, steering rod was left the same.

                  was only after 3deg camber which is what i got.

                  I think 10mm was cut off the tie rod ends.

                  just remember hieght of the car has an affect on how much you need to trim etc.

                  Comment


                    #54
                    A nice EK:

                    F: 15x7 +27 with 205/50
                    R: 15x7 +27 with 205/50

                    Comment


                      #55
                      Just an update on mine
                      F: 16x8+30 -1.8deg
                      R: 16x8+30 -.7deg

                      sigpicCurrent holder of the Win folder.

                      Comment


                        #56
                        Originally posted by Didz View Post
                        Just an update on mine
                        F: 16x8+30 -1.8deg
                        R: 16x8+30 -.7deg

                        http://i95.photobucket.com/albums/l1...r/DSC_0013.jpg
                        Way less mexiflush . Looks good.

                        Comment


                          #57
                          Yeh im really happy with the result
                          sigpicCurrent holder of the Win folder.

                          Comment


                            #58
                            enkei rpf1
                            16x7 +35



                            /Oo ___H___ oO\
                            |=_/_______\_=|

                            Comment


                              #59
                              I've seen a NEAR perfect set of rims... style, color, width, offset... EVERYTHING!

                              17x8 +30... I'm seriously contemplating them... Anyone want some white Weds SA90's (17x8 +35)?

                              You think they'll fit without much hassel Tom? I've noticed Didz is running 16x8 +30 and -1.8 front and -0.7 rear. Only really worried about the front, as i've read you can only dial in so much front camber, i know i can dial a fair bit of camber in the rear. I would probably run 224/45's (Unless you think there is something better) and i have Tein SS with Whiteline rear camber bushes at the back.
                              Last edited by 45SET; 07-05-09, 05:42 PM.

                              Comment


                                #60
                                Originally posted by 45SET View Post
                                I've seen a NEAR perfect set of rims... style, color, width, offset... EVERYTHING!

                                17x8 +30... I'm seriously contemplating them... Anyone want some white Weds SA90's (17x8 +35)?

                                You think they'll fit without much hassel Tom? I've noticed Didz is running 16x8 +30 and -1.8 front and -0.7 rear. Only really worried about the front, as i've read you can only dial in so much front camber, i know i can dial a fair bit of camber in the rear. I would probably run 224/45's (Unless you think there is something better) and i have Tein SS with Whiteline rear camber bushes at the back.
                                You shouldnt have a problem as the difference in size is .1 of an inch larger with 17" and 225/45 so basically, if stock wheels fit on ur car, these should as well.
                                sigpicCurrent holder of the Win folder.

                                Comment

                                Working...
                                X