Announcement

Collapse
No announcement yet.

◄◄◄◄ The Wheel Fitment Thread ►►►►

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    my tires ar 235/40 with guards rolled...

    camber in the rear is -3.5 and the tire is FLUSH to the guard

    Front im running -4.6 , plenty of clearance, doesn't need that much though if u want hte FLUSHED FLUSHHY look!
    Integra Type R
    Integra Type S
    S2000

    Comment


      sheeeet!! much more than i had in mind. how is the camber wear? LOL

      Comment


        I've been rocking -3' in the rear of my car for a couple of years now... no problems at all. Plenty of camber on the rear is fine. You won't get much wear. Just rotate the tyres every oil change (5K km) and you'll get PLENTY of life out of the tyres.

        Comment


          Originally posted by danielj View Post
          how much camber are your running? not really worried about the front, just the back. LOL..how wide are your tyres?
          thanks.
          -2.5 should be enough to fit them into the guards if u use 235/40 tyres

          Comment


            Hi all,

            Have been through the pages and theres some pretty hot and agressive ones, nice work

            Hopefully an easy question, I have a dc2r with 16" Advanti Maze R's at the moment with 225's, slightly rub on full lock.

            Would something like a 17x7.5 +45 need guard rolling or should they fit relatively easy? If not, should I be looking for 6.5 - 7" wide rims?

            http://www.rotaaustralia.com.au/rota...s_p1047162.htm

            Cheers all!
            4AGTE AE86 --> R32 GTR --> WRX --> STi --> DC2R

            Comment


              Work VS-XX
              Front 17x9 255/40/17 +35
              Rear 17x8 245/40/17 +30

              No rubbing nothing... Needs to be lowered majorly though lol......
              It's a boat will show fotos later..

              Comment


                would 17 x 8.5 +30 fit on DC5 properly?

                Comment


                  17x7.5 +30 on a dc2r possible?
                  MY VTEC GOOOES!BAAAAAABWAAAAAAH

                  Comment


                    Originally posted by jneration View Post
                    would 17 x 8.5 +30 fit on DC5 properly?
                    Yes, it would be hot. i would run this front and rear, with guards rolled, and u can run sensible camber of -0.5.
                    Integra Type R
                    Integra Type S
                    S2000

                    Comment


                      Originally posted by plAythiNG View Post
                      Yes, it would be hot. i would run this front and rear, with guards rolled, and u can run sensible camber of -0.5.
                      Got that on my car with -2.8 camber at the front. Had to raise the car a little because it was scrubbing the front fender but it all depends how low you go.

                      Comment


                        Originally posted by M@lew View Post
                        Got that on my car with -2.8 camber at the front. Had to raise the car a little because it was scrubbing the front fender but it all depends how low you go.
                        When i had that setup, it would only scrub on full lock.

                        Comment


                          I'd scrub whenever I'd go over a hard bump. Ash is running the same set up with less camber and he scrubs on full lock.

                          Comment


                            Originally posted by jneration View Post
                            would 17 x 8.5 +30 fit on DC5 properly?
                            I have that set up right now. Scrub depends on how low you are. I dont get any scrub at all with 245 wide tyres.
                            sigpicCurrent holder of the Win folder.

                            Comment


                              Originally posted by RSKEBBY View Post
                              17x7.5 +30 on a dc2r possible?
                              anyyyyyyyoneee !
                              MY VTEC GOOOES!BAAAAAABWAAAAAAH

                              Comment


                                17 is too big for a dc2.... 16 !
                                Integra Type R
                                Integra Type S
                                S2000

                                Comment

                                Working...
                                X