IPS (Intrinsic Perferformance Solution) Cams for K20

[DrTran]

http://www.intrinsicperformance.com/products.html

I'm not sure if some of you guys have seen this company but there cams are pretty good for dc5's

[tinkerbell]

I reckon the Toda ones are pretty good too:

http://todaracingusa.com/category?se...ct&cid=22&id=3

[DrTran]

TODA always has great products. I guess it just depends on what your going for. But here is one of the dyno comparason

[SPL_K]

IPS Clutchmasters DC2 FTMFW!

[Nepolian]

Toda spec a's are'nt that big tho!

[tinkerbell]

Spec A3 IN P 245(9.2mm) S 240(8.7mm) VTEC lobe 295(13.0mm)
Spec A3 EX P 240(8.9mm) S 235(8.4mm) VTEC lobe 290(12.5mm)

IPS-K2 IN P 253 (9.25mm) VTEC lobe 302(13.28mm)
IPS-K2 EX P 246 (8.10mm) VTEC lobe 295 (11.84mm)

[Nepolian]

Post 5 edited....oops....thats what I meant

[eg5]

We had IPS K2 on our previous EGK20A
K20A2
Ran pretty good numbers

[gunpoons]

imo i think it would be fairer to compare the k2 to toda's spec c
K2 Vtec lobe int-302(13.28) exh-295(11.84)
C Vtec lobe int-300(13.0) exh-295(12.5)

[PolitoHood]

Can you use k2 intake cam and a toda Spec C Exhaust cam on the same engine.

Mix em up??

[tinkerbell]

hmmm, you can do it on B-series, so i guess you can on the K...

but it would be trial and error to see if/how it works... so lots of tuning on teh dyno involved...