JDM DC2R (96 Spec) rear rotors replacement

[dynosaur]

hi every itr members,

I got a JDM DC2R (96 Spec) , now it's the time to change the rear rotors.

does any1 know which model (Prelude ?) the rear rotor can direct replace to my itr ?

my PCD is 114.3x4

thank you

[na-tastic]

just get JDM dc2R ones

i went to a wrecker to get some front rotors

lol he had a load of 4 studs one but none of the AUDM 5 stud ones!

[TOU93]

you have to get proper ones for the car, no other ones will fit.

[dynosaur]

I though Prelude 93 (BB6) rotor will fit into.....

if so, any brand can recomend ? (RDA? DBA?)

p/s: for street use

[vinnY]

the lude rotors won't fit
if you check the dba website the specs are different

afaik the rear disc on the si is 260mm while the 96spec itr is 242mm or something

[tinkerbell]

you have to get proper ones for the car, no other ones will fit.

i seriously think that this is TRUE.

[na-tastic]

how bad are you rotors?

if they're still relatively thick, just get them machined.

and then during that time, source for some replacement ones

[vinnY]

this and getting genuine oem rotors are probably about the only choice at the moment

[dynosaur]

it would probably cost me around AU$500, which I think this kind of quality not worth that much of $. I would rather spent for other quality brands (Project Mu, Delphi Lockheed).

My budget only constrain around AU$200. :P

[vinnY]

well its about $120US for the pair and last time i was quoted approx. $50US to ship to australia

so thats about ~$265au
try to find someone to redrill/bore the center if you can, should end up cheaper, just can't use the retainer screws

[dynosaur]

i will give a try to get the shipping qoute for the rotors. see how it go first...

if not, may be I just go for DBA (slot & drill) disc and CNC the rotor.

May I know how much it may cost me for CNC the rotor ?

[tinkerbell]

what is CNC?

[vinnY]

yeah no idea how much it'll cost to bore out the center, finding a place to do it is hard enough

[dynosaur]

what is CNC?

here u go....

http://en.wikipedia.org/wiki/CNC

[dynosaur]

yeah no idea how much it'll cost to bore out the center, finding a place to do it is hard enough

I can find a place to do this job.

hope some1 can give me an idea to prevent been ripe off, just I am not sure what is the market price to do this job..