Announcement

Collapse
No announcement yet.

CEL Issue (Error P1166 & P1167)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Any luck with sensors Phil?

    Also, about limp mode. The car goes all wobbly on idle and won't accelerate past about 4000rpm. It will also lose a lot of drive. I sometimes go into limp mode if I try start the car too quickly in the morning (not allowing fuel to prime etc)
    Wakefield: EG B18CR - R888 - 1.09.9
    Eastern Creek: DC5R - RE001/ER300 - 2.00.8
    Winton: DC5R - RE001 - 1.45.9

    Comment


      #32
      Originally posted by munkaii View Post
      Any luck with sensors Phil?

      Also, about limp mode. The car goes all wobbly on idle and won't accelerate past about 4000rpm. It will also lose a lot of drive. I sometimes go into limp mode if I try start the car too quickly in the morning (not allowing fuel to prime etc)
      didn't end up doing it today, i was too hungover man. Nah car definately drives fine and goes all well!
      S2000
      WSID : TBA
      Wakefield : 1:10.1

      Flippit Photography
      Smooth As Detailing
      Incar Racing

      Comment


        #33
        So I tried changing Primary o2 sensors with 2 used ones in unknown condition and still coming up P1167. I've checked the plugs and wiring and theres nothing wrong, i've checked fuses also and still. So i've sort of hit a brick wall with this CEL. Only way now is Hondata and that will fix it up! I asked adrian if you can put a defouler on the primary and he said not too cause its a wideband and it will start doing weird shit.

        I put a 2nd defouler on the secondary sensor and did nothing.

        sigh..
        S2000
        WSID : TBA
        Wakefield : 1:10.1

        Flippit Photography
        Smooth As Detailing
        Incar Racing

        Comment


          #34
          Originally posted by Flippit View Post
          So I tried changing Primary o2 sensors with 2 used ones in unknown condition and still coming up P1167. I've checked the plugs and wiring and theres nothing wrong, i've checked fuses also and still. So i've sort of hit a brick wall with this CEL. Only way now is Hondata and that will fix it up! I asked adrian if you can put a defouler on the primary and he said not too cause its a wideband and it will start doing weird shit.

          I put a 2nd defouler on the secondary sensor and did nothing.

          sigh..
          Question on that does the dc2R have a wideband sensor or narrow band sensor??
          sigpic
          128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=

          Comment


            #35
            Originally posted by Karl View Post
            Question on that does the dc2R have a wideband sensor or narrow band sensor??
            TBH I'm not too sure on the dc2r's
            S2000
            WSID : TBA
            Wakefield : 1:10.1

            Flippit Photography
            Smooth As Detailing
            Incar Racing

            Comment


              #36
              Sorry it couldn't help you mate. Spewing ..

              Maybe mine weren't tip top condition? Untested so very hard to say

              Sent from my GT-I9100 using Tapatalk 2
              Wakefield: EG B18CR - R888 - 1.09.9
              Eastern Creek: DC5R - RE001/ER300 - 2.00.8
              Winton: DC5R - RE001 - 1.45.9

              Comment


                #37
                Originally posted by munkaii View Post
                Sorry it couldn't help you mate. Spewing ..

                Maybe mine weren't tip top condition? Untested so very hard to say

                Sent from my GT-I9100 using Tapatalk 2
                all good thanks heaps bro!

                2 fit, one was wrong plug another was too short! so devo
                S2000
                WSID : TBA
                Wakefield : 1:10.1

                Flippit Photography
                Smooth As Detailing
                Incar Racing

                Comment

                Working...
                X