My car is feeling sluggish...

[Flippit]

If you are still worried about losing your power fc tune, you should be able to head out to your tuner which he should have most likely saved the final tune in a data file which then he should be able to just load it back on AGAIN just for piece of mind.

Although im not sure if power fc has that capability or not

[Calsonic_R32]

sluggish all of sudden?

I will check the tyre pressure first

[tinkerbell]

Check leads with a resistance tester.. They should all read 0 ohms or very close to..

Karl, i appreciate that you are trying to help, but please feel free to check accuracy of your facts before making authoritative comments like this...

spark plug leads REQUIRE high resistance to operate properly.

if a Honda spark plug lead reads 0 ohms or similar - it is broken.

they should be in a DC2 = 10 - 20k Ohms roughly (shorter ones obviously lower value than the longer ones)

[Karl]

Karl, i appreciate that you are trying to help, but please feel free to check accuracy of your facts before making authoritative comments like this...

spark plug leads REQUIRE high resistance to operate properly.

if a Honda spark plug lead reads 0 ohms or similar - it is broken.

they should be in a DC2 = 10 - 20k Ohms roughly (shorter ones obviously lower value than the longer ones)

Yer stand corrected.. Just checked my car.. When my parents camrey wasn't running well i check there leads and some were high value and some were really low... So i replaced all 4 and it fixed the problem.. One thing if they were broken it would be higher or infinity ohms not 0... 0 ohms means no resistance!!

[rayDC2R]

Yeah I check tyre pressures at least once a month so that's not the issue... Cheers!

[Flippit]

i know what you need!

http://www.youtube.com/watch?v=_nYXk...eature=related

[Karl]

dont no if this will help you.. But the ohm rating of my Oem leads are 6600, 9160 , 10200, 12100 Ohm's.. Also tinkerbell why do they have such a high resistance????

[tinkerbell]

Also tinkerbell why do they have such a high resistance????

due to the carbon core OEM design, which helps reduce EMI...

aftermarket wires are a different design, and will have lower resistance (but might cause more driveability/tuning issues)

[Karl]

Ok my after market ones have a resistance of 84,96,124,126 ohm's... So alot less.. Is this bad.. Should i just run the stock leads

[tinkerbell]

Ok my after market ones have a resistance of 84,96,124,126 ohm's... So alot less.. Is this bad.. Should i just run the stock leads

only if you are having drivability problems - like misfires etc...

[Karl]

Ok sweet. Thanks mate!!

[ahmiie]

what was it in the end?