DC5R wheel Help!!!

[the one]

Hii guys

just looking to get rims for my dc5r and need some help with it! Ive found a pair of rims XXR 522 17x8 flat black with 35 offet..

does anyone know ov this brand or are they any good ???

Also looking to put a 235/40 r17 tyres on these rims...will it fit with this offset without any problems????


cheers

[plAythiNG]

For a x8 inch wheel i rather for 225/40 / 225/45 on it. See the front of my car. Thats 17x8 and i ran 225/45/17 advan AO 48 on it

[45SET]

First off.

Good to see you have searched this, as it has been covered MANY times in the past.

XXR are ok. The size is good. If you don't want to have any speedo problems, you'll need to run a 225/45/17.

You won't have any problems in the front, but you'll need to run about -3' camber if your rear guards aren't rolled.

[the one]

damn really i dont wanna roll guards or anything like that...225/40 17 better choice u rekon ???

225/45 sits to high and is a big as well!!!

[ChargeR]

damn really i dont wanna roll guards or anything like that...225/40 17 better choice u rekon ???

225/45 sits to high and is a big as well!!!

You won't have to roll guards, and the camber number that 45SET quotes is like always heavily dependent on ride height. With a 225/45 on a 17x8 +35, -3 will clear when your ride height is basically tyre level with guard at the rear but you can use less camber if your ride height is higher.

225/40 is a nearly unobtainable tyre size. Available in Hoosier R6 and not much else. Just use a 215/45, you won't need to roll the guards, will need very minimal camber and it is less big.