Hi all,
Just wondering with the two bolts holding the trailing arm to the hub assembly, one of them is a 17mm bolt with a welded nut so that's easy to remove. What about the other bolt which has an eccentric washer welded to the bolt head? Do you crack open the 17mm and then pry the bolt out using a flathead?
Looking at bolts 15 and 16 in this guide:
http://www.team-integra.net/forum/bl...placement.html
Cheers to all in adv.
Kevin
Just wondering with the two bolts holding the trailing arm to the hub assembly, one of them is a 17mm bolt with a welded nut so that's easy to remove. What about the other bolt which has an eccentric washer welded to the bolt head? Do you crack open the 17mm and then pry the bolt out using a flathead?
Looking at bolts 15 and 16 in this guide:
http://www.team-integra.net/forum/bl...placement.html
Cheers to all in adv.
Kevin
Comment