16x8 +35 Rims with 215/45/16 tyres - will they fit on DC2R?

[apparition]

Hi guys
Just wondering if anyone here has or is running 16x8 +35 Rims with 215/45/16 tyres on their DC2R?

I believe that the rolling of the front guards will be required, but will they rub the back guards? Just saw some 16x8 +35 rims for sale, but not sure if it will stick out the front guards or rub the front and rear guards? I'm also assuming that I would need to remove my plastic fender/guard liners also?

My DC2R is currently lowered (1.5 finger gap between tyre and guard atm) with 2.5 negative camber on the front.

Thanks for your help!

[felixR]

Anything in this thread?

[visconti]

i had 16x8 +38 on dc2r before
i rolled the back, but as far as i remember i didn't roll front or take out the fender liner

but your looking at +35 which is 3mm out

[zeth_an]

Most likely you will have to roll front and rear with 1.5 finger gaps.

sure you can run massive camber at the front... but what about the rear?

[apparition]

Thanks for the info guys! I think I won't go ahead with 16x8 +35 rims due to issues with rubbing on the guards.

[Calsonic_R32]

I am running 16x8 +35 with 225/45 tyres

definitely need to roll the guards

[fatboyz39]

Rear guards will need a roll. Fronts should be Ok.