rear bar gap on JDM rear bar! MELBOURNE BALLERS HELPE ME!

[plAythiNG]

hey guys,

so I fitted the jdm rear buumper... what have u guys done to eliminate this ugly gap in the bumpeR?
From the pics, u can so see the chassis


What should I do about the bumper gap. The chassis is revealed and really looks incomplete!

[45SET]

Get a bigger number plate. Oorrr... you can buy a carbon fiber mugen 'plug' for it... but you'd have to drill through it to mount your plate, and then cut it for thr lights.

This is what mine looks like

[Karl]

Paind the bumper silver like the rest of the car and it will all be the same colour.. So look better!!!!!!

[danielj]

just put a metal plate sortathing in between bumper and numberplate. paint it to the colour of the car of course

[plAythiNG]

Karl, seriously u wasted my time checking email notification on this thread. Hey robi- yeah i originally looked into the custom plates etc... Not
Paying $440/year for a short and fat numberplate lol. Daniel- im most likely
Going to do what you said, will speak to Body form and see what he thinks he can fibreglass up.

[45SET]

Karl, seriously u wasted my time checking email notification on this thread. Hey robi- yeah i originally looked into the custom plates etc... Not
Paying $440/year for a short and fat numberplate lol. Daniel- im most likely
Going to do what you said, will speak to Body form and see what he thinks he can fibreglass up.

You should be able to get something plastic welded on.

I still can't beleive you guys have to pay an annual fee for your numberplates... one thing that is better about QLD. I paid $395 for my plates 5 years ago... nothing since.

[plAythiNG]

ur lucky Robi!

RE: the mugen cf cover, because its CF, i woukdnt wanna colour match it, but with that being the only cf part, its so ricey, out of place.

[mrntegra]

u get the photo i mms'd you this morning mate?? U dont notice it at all mate.. dont stress bout it!

[plAythiNG]

Matt, can u resend? My fone has been off all day, cleaning up house and busy wiuth work lol.

or can u PM the phot to me so I can check it out in a better resoulautionplease

[munkaii]

You can fit normal slimline plates in with JDM rear bumper with a little bit of filing at the top corners of the number plate in NSW.

[plAythiNG]

You can fit normal slimline plates in with JDM rear bumper with a little bit of filing at the top corners of the number plate in NSW.

Nah the number plate fits perfect - tested it already, my question is the chassis is revealed because we have slim plates, UK and JDM plates are short and fat (like qld plates seen on Robi (45set) .. these plates cover up the entire thing.

Here is what myintegra sent me;



Only downside I see here is the loom/wiring for the light for the number plates. Goood thing is the AUDM has two plugs and JDM only requires the one, so theres lots of slack I can position it in a way, the loom cannot be seen . I might jsut leave it like that. Looking at Vuongsters old car, he gets away with it quire well

[plAythiNG]

I'm also considered a Mugen wing now to bring the attention up high and away from the number plate gap

[plAythiNG]

another option is this;http://www.justjap.com/store/product...60&cat=&page=1

geta jdm number plate, spray it matt black, ikt will definaitely cover up the gap and then mount my plate on top of that? im sure this will cover up any gaps

[plAythiNG]

Another option is I can put my AUDM rear bumper back on and have them to mould the mugen rear lip on to that and sell off my jdm rear bar?

Remmeber Keirans?!

http://forum.clubitr.com.au/showthread.php?t=5923

I'd go and mould it as it doesnt look finished there.

[Karl]

boo hoo. Want be as notiable if it was all the same colour, Dont no why'd youd bother fitting untill it was sprayed!!!!!