Originally posted by tinkerbell
View Post
Announcement
Collapse
No announcement yet.
16" JDM tires rubbing
Collapse
X
-
Full lock.. not sure about when driving.. Also above the wheel.. So they be from bumps of somthing i guess!!sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
-
Every things seemd good.. The shake test.. Very stiff.. Very hard suspension.. No bouncing..Originally posted by tinkerbell View Postwhat condition are your lower control arm bushes in?
what about your steering rods?
what does the 'shake test' tell you?sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
The shock's looked new.. so the springs may have been changed!! how could i tell!Originally posted by KEVSY View Posthmm that looks like a tein spring , can you check could be just too low. im running 205 45 16 (yep under rated) on hrv rim with stock springs , shock and buddy club camber kit, no rubbing.sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
there were 215 45 16 name bridgestone Playz.. sound.. i could only hear it on full look.. Like a rubbing noise.. there no knocking noise or any thing!sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
hmm, so not ultrawide like semi slicks then.Originally posted by Karl View Postthere were 215 45 16 name bridgestone Playz.. sound.. i could only hear it on full look.. Like a rubbing noise.. there no knocking noise or any thing!
if it is only on full lock, i doubt you are alone - mine rub on full lock too!
(i have 205/50R16's)
and *sometimes* on big pot holes the tyre hits the 'roof' of the wheel arch... but this hardly ever happens - except on The Lakes Way for example...... retired/
Comment
-
Ok i have a idea.. I have 205/50/16 on the back.. i could switch them front to back and see if they rub.. But the rubbing got pretty bad with the 215/45/16...
Ill let you guy no how i go!!sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
To add if i go and buy 205/45/16 what tyre do you guys recomond for around the 200 buck mark...sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
i was running hancock k105 205/50r16 lowered on bc coilovers 6k/4k, was rubbing like crazy at the roof and on full lock
was contemplating changing to stiffer springs but decided to change to lower tyre profile, got ku31 205/45r16 legal load rating 87v and rubbing is full gone.
i think the stiffer side wall of these new tyres helped
karl i got the ku31's for 165 apiece in melbourne, i was told they go for like 100bux in sydney, i ran ku31 on my last 2 cars and have nothing but good experiences with them
Comment
-
Thanks heaps mate..sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
Getting them for 150 each.. Also what you guys recommend for the rear camber??? How much negative you guys think!!sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
-
to add got them on.. and 1/2 degree camber!! all round.. hasn't rubbed yet.. need a night drive to see how it goes under pressure!!!sigpic
128.8kw Atws @ 1065kg - 13.875 sec @ 100.26 mph http://forum.clubitr.com.au/showthre...ion&highlight=
Comment
Comment