Announcement

Collapse
No announcement yet.

EP3 RM01A on DC5?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    EP3 RM01A on DC5?

    Tried some searching but no luck.

    Can an EP3 RM01A catback direct bolt onto a DC5?

    i think they are the same? can anyone confirm?

    Thanks a HEAP!
    AUTO | Ktuned @ 115.2 kw atw | ITR Cams-TB-I/M | XForce 4-2-1 | Toda Catback | Mugen Intake | Whiteline | Buddyclub N+ | Buddyclub SF3

    #2
    Correct me if I'm wrong. Pretty sure it wont fit, I remember reading exhaust from a dc5 and ep3 is different in length.

    Comment


      #3
      have someone selling hella cheap rm01a for EP3.
      im digging and finding nothing..
      AUTO | Ktuned @ 115.2 kw atw | ITR Cams-TB-I/M | XForce 4-2-1 | Toda Catback | Mugen Intake | Whiteline | Buddyclub N+ | Buddyclub SF3

      Comment


        #4
        For the ep3 and dc5 exhausts, the headers are the same.

        Most branded ones will also have the same b pipe. The difference will be in the axle back where you'll find that the dc5 one is longer.

        If you want to fit a ep3 exhaust, you would need to cut it and weld some extra piping to extend it.
        Instagram: @ictorv2 & @00zaku

        Comment


          #5
          Originally posted by stienerv2 View Post
          For the ep3 and dc5 exhausts, the headers are the same.

          Most branded ones will also have the same b pipe. The difference will be in the axle back where you'll find that the dc5 one is longer.

          If you want to fit a ep3 exhaust, you would need to cut it and weld some extra piping to extend it.
          Spot on ^^
          Might also add that I've had this done and a decent exhaust shop should charge 250 for it.
          1995 Honda Civic EG (K20)
          1998 Nissan 180SX Type X (SR20)
          2010 Volkswagen Golf GTI (Emission Monster)

          RHCP
          F1 Nut

          Comment

          Working...
          X