Announcement

Collapse
No announcement yet.

Few questions about K20A swap into EK?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Few questions about K20A swap into EK?

    Hey guys, will i ended up getting a honda civic hatch vtir ek4, and i am just wondering will abs, and power steering, a/c fit? cause i am thinking about doing a k20a swap into my ek in couple months time and need few advice and if you guys have had any experience please let us know, would be greatly appreciated.


    Thanks
    Michael

    #2
    Re: Few questions bout k20a swap into ek?

    Yes you can retain ABS, P/S & A/C if you carry out a K swap on your EK4
    Sleeping Performance & Mechanical Repairs: Balance, Feedback, Response

    Ph: +61397947767
    Address: 6/253 Princes Hwy, Dandenong VIC 3175
    Email: josh@sleepingperformancemr.com.au
    Website: www.sleepingperformancemr.com.au
    Facebook: www.facebook.com/sleepingperformancemr

    Comment


      #3
      If your retaining Ek subframe (EKK1 mounts) you can retain ABS, P/S (bonnet will need a decent hole), a/c (tight fit). This will limit the choice of aftermarket headers you can run i.e DC sports. Driveshaft angle is less then ideal.

      Switch to the EG/DC2 subframe (EKK2 mounts), ABS has to be removed, P/S and A/C will fit better. Better selection of headers i.e PLM, ASP, SSR and etc. Driveshaft angles sits alot nicer.
      BYP Racing & Developments
      Built. Tuned. Driven
      Want to go fast? Come see us! e: jimmy@bypracing.com ph: (02) 9757 4757

      Comment


        #4
        Thanks for the heads up guys


        Just one thing can you fit abs without having to put a hole through the bonnet?
        need a mechanic that has had a experience in k swap engines in ek, so i know that they know what their doing exactly so if you know any mechanics please let us know, will be greatly appreciated.


        Michael

        Comment


          #5
          Re: Few questions about K20A swap into EK?

          Where are you located?
          Sleeping Performance & Mechanical Repairs: Balance, Feedback, Response

          Ph: +61397947767
          Address: 6/253 Princes Hwy, Dandenong VIC 3175
          Email: josh@sleepingperformancemr.com.au
          Website: www.sleepingperformancemr.com.au
          Facebook: www.facebook.com/sleepingperformancemr

          Comment


            #6
            ABS can fit with EKK1 mounts. P/S might fit with the inner webbing of the bonnet being removed. If you want to retain ABS with Ekk2 you'll need to relocated the ABS unit.
            BYP Racing & Developments
            Built. Tuned. Driven
            Want to go fast? Come see us! e: jimmy@bypracing.com ph: (02) 9757 4757

            Comment


              #7
              Im located in brisbane.

              Comment

              Working...
              X