Show off thread: New mods

[fatboyz39]

wooooo nice mods.

[zel05]

Woo...have been saving and researching for these parts for a very long time...

and finally they arrived today!!



What you see is the following:

Hardrace Adjustable Camber kit modified with bronze bearings and shims to allow for extra caster.

PCI spherical rear trailing arm bushes

Hardrace hard rubber Roll centre adjusters


I actually feel really sorry for the guy in the US that has sent all this out. You see, I ordered a Hardrace front LCA kit with bronze bushings to go with all the above. It seems as if he's mispacked the original order, because I now have 2 sets of PCI real trailing arm bushes...and I have another tracking # pending, which I assume is the missing front LCA kit. Just feel sorry for the extra headaches he is now going to have to deal with.

But who knows...I might have a PCI spherical rear trailing arm bush kit up for sale very soon

[ChargeR]

Woo...have been saving and researching for these parts for a very long time...

and finally they arrived today!!

http://img523.imageshack.us/img523/2...80largefp3.jpg
What you see is the following:

Hardrace Adjustable Camber kit modified with bronze bearings and shims to allow for extra caster.

PCI spherical rear trailing arm bushes

Hardrace hard rubber Roll centre adjusters


I actually feel really sorry for the guy in the US that has sent all this out. You see, I ordered a Hardrace front LCA kit with bronze bushings to go with all the above. It seems as if he's mispacked the original order, because I now have 2 sets of PCI real trailing arm bushes...and I have another tracking # pending, which I assume is the missing front LCA kit. Just feel sorry for the extra headaches he is now going to have to deal with.

But who knows...I might have a PCI spherical rear trailing arm bush kit up for sale very soon

Nice parts! What made you wan't to adjust the location of your roll centre? Be sure to post up yout experiences with the Hardrace RCAs, I have considered using them and I would be interested to see how they hold up.

[uncivilised]

not so much a mod but a necessity.

[zel05]

regarding the RCA's...I haven't had much personal experience with them, however, have read about them and a lot of reviews on the improvements that can be had with their installation.

I haven't taken any measurements or anything like that with respect to whether I need it or not...But I figured I can try them out if they are required. If not, I may have a set here for you to buy :P

I will post every experience I have with driving my car once I get this gear under my car...however, as labour costs will no doubt blow out...I'll have to install most items i have sitting in the garage in one hit (whiteline castor kit, whiteline FSB, Mfactory rear camber kit, Mfactory rear toe kit and the above mentioned items)...so gauging how well they perform may not be possible without mixing the results with other parts.

[ChargeR]

regarding the RCA's...I haven't had much personal experience with them, however, have read about them and a lot of reviews on the improvements that can be had with their installation.

I haven't taken any measurements or anything like that with respect to whether I need it or not...But I figured I can try them out if they are required. If not, I may have a set here for you to buy :P

I will post every experience I have with driving my car once I get this gear under my car...however, as labour costs will no doubt blow out...I'll have to install most items i have sitting in the garage in one hit (whiteline castor kit, whiteline FSB, Mfactory rear camber kit, Mfactory rear toe kit and the above mentioned items)...so gauging how well they perform may not be possible without mixing the results with other parts.

I have a DC5 sadly . All those parts you mention will transform the car although with that much adjustability it might take a bit of trial and error to get the car right.

Since this is the new mods thread here is my newest mod for those who don't read my blog thread, and you really should read my blog thread because it is awesome.

[zeth_an]

Woo...have been saving and researching for these parts for a very long time...

and finally they arrived today!!


What you see is the following:

Hardrace Adjustable Camber kit modified with bronze bearings and shims to allow for extra caster.

PCI spherical rear trailing arm bushes

Hardrace hard rubber Roll centre adjusters


I actually feel really sorry for the guy in the US that has sent all this out. You see, I ordered a Hardrace front LCA kit with bronze bushings to go with all the above. It seems as if he's mispacked the original order, because I now have 2 sets of PCI real trailing arm bushes...and I have another tracking # pending, which I assume is the missing front LCA kit. Just feel sorry for the extra headaches he is now going to have to deal with.

But who knows...I might have a PCI spherical rear trailing arm bush kit up for sale very soon

Howmuch did Camber Kit set you back if you don't mind telling me?

[zel05]

PM sent

[zeth_an]

Thank you

[3r1k]

Let me know about hardrace parts... I was thinking to buy some of their stuffs but there isn't enough information about the quality.

[supersteve]

I have this on order

http://filer.case.edu/~jsh28/drew/bodykit.html

Will post pics up soon

[geeang]

Just something new and unique for a bit of fun (thanks to Shift Performance of course)

[Berty]

LOL cool

[TlNKERBELL]

[QUOTE=geeang;134427]Just something new and unique for a bit of fun (thanks to Shift Performance of course)


QUOTE]

...Nise copy

[freakygeek]

...Nise copy

Oh dear, we have a tinkerbell imposter!