This is what I usually do on the final hour or so before...
1. Restore any black trim so its contrasting next to a shinning paint
IMG_1850.JPG
2. Add a fresh coat of Carnauba wax or use spray wax to make the paint pop, I use an easy on easy off, non streak formula to save hard work
IMG_1860.JPG
3. Vacuum the carpet and seat so it look clean and tidy
4. A quick wipe down of interior trims, dash and leather with non-greasy conditional to give it a new look and wipe off excess to avoid shinny look
IMG_1857.JPG
5. Clean and wipe smudges and haze on glass
6. Dress the tires and outer wheel well trim with non-sling tire gel and finally apply wheel sealant to wheel
IMG_1885.JPG IMG_1887.JPG
NB: My ride was wash in the morning and the finish was regularly maintain with clay bar and sealant as the fundamental to my protect and shine routine
1. Restore any black trim so its contrasting next to a shinning paint
IMG_1850.JPG
2. Add a fresh coat of Carnauba wax or use spray wax to make the paint pop, I use an easy on easy off, non streak formula to save hard work
IMG_1860.JPG
3. Vacuum the carpet and seat so it look clean and tidy
4. A quick wipe down of interior trims, dash and leather with non-greasy conditional to give it a new look and wipe off excess to avoid shinny look
IMG_1857.JPG
5. Clean and wipe smudges and haze on glass
6. Dress the tires and outer wheel well trim with non-sling tire gel and finally apply wheel sealant to wheel
IMG_1885.JPG IMG_1887.JPG
NB: My ride was wash in the morning and the finish was regularly maintain with clay bar and sealant as the fundamental to my protect and shine routine