Announcement

Collapse
No announcement yet.

S2000 - My Story

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #91
    Originally posted by plAythiNG View Post
    haha. I will keep getting that award for the next year LOL
    Just updating my buy list. Got everything almost

    Just also wanted to update my "to buy list"

    1 - new glovebox
    2 - new roof liner
    3 - single exit catback
    4 - AP2 centre console
    5 - FD2R gearknob - got a skunk2 instead, felt it was more ergonomic
    6 - AP2 door cards
    7 - AP2 OEM lip
    8 - OEM bootlid
    9 - OEM clear side indicators
    10 - oil filter stopper (most likely J's)

    11 - Fixed back bucket with matching rail
    12 - remove Defi ZD from DC5 and install in AP1
    13 - single exit rear cap for rear bar
    14 - 4.77 final drive
    15 - respray in OEM MCB - going to go Laguna Pearl
    16 - AP2 Tail lights

    The larger font is what is outstanding
    This thread needs a massive update.

    When I first got the car I made the list above for items I want for the car. I assumed it would have 1-2 years for me to source all the parts, but I now have al the parts above. Just minus the respray, and well the new final drive. However Top One can source it for me anyways. Will update soon with a big post so I dont lose track of all the items I have been buying on a weekly basis lol!
    Integra Type R
    Integra Type S
    S2000

    Comment


      #92
      Sitting in my in-law's spare bedroom I have a few parts, so any S2000 reads please PM me if you want the aprts IE rails!

      AP1 AUDM yellow Bumper - bought this as a spare as I sold my MCB one and could still dirve the car. only has a small less than one inch crack which I have closed via cable ties - FOR SALE
      S2000 Bride MO rails - suits bottom mounted seats both driver and passenger - FOR SALE
      S2000 Bride FG rails - suits side mounted seats both driver and passenger - FOR SALE
      AP2 centre console
      AP2 door cards
      Recaro SPG
      Recaro side mount rail
      AP2 tail lights
      OEM clear indicaors
      OEM amber idnicators
      Moroso weld in baffle plate with trap door
      brand new hasport 62A engine mount kit
      brand new whitelien front sway bar
      brand new oem genuine side strakes
      brand new ap2 JDM front bar
      genuine Ap2 front lip
      AP2 tail light gaskets
      SpoonZ plug and play Ap1 to Ap2 tailight kit
      Skunk2 Gear knob - brand new - FOR SALE
      OEM extended floor mats
      extended seat belt buckets for bucket seats
      nardi steering wheel
      works bell quick release
      works bell short hub
      spare oem bootlid
      ap2 banjo bolts
      ap2 retainers
      ap2 cotters
      Ikeya formula front upper arms - spherical
      Hardrace RCA joints front
      Hardrace Rear toe arms
      Hardrace Front Anti Bump Steer Kit
      brand new clutch master cylinder
      brand new clutch slave cylinder
      brand new act prolite flywheel
      brand new oem clutch face
      brand new act heavy duty pressure plate
      heaps more brand new oem parts but literally lost count!
      STILL HAVE TO UPDATE
      Last edited by plAythiNG; 25-06-15, 12:07 PM.
      Integra Type R
      Integra Type S
      S2000

      Comment


        #93
        Thought I might do a current mod list for the car as of today:

        Engine:
        - Injen CAI
        - Mugen Header
        - Berk 70mm hi-flo cat
        - Spoon N1 single exit catback
        - Greddy e-ultimate with Boomslang plug & play with SAS tune
        - tegiwa oil stopper
        - Koyo racing radiator
        - Mugen fan switch
        - Mugen thermostat

        Suspension & Chassis:
        - BC BR coilovers, removed and running OEM setup
        - Innovative 60A diff mounts
        - Hardrace driveshaft spacers
        - OEM blank rotors
        - Goodridge Braided Brake Lines
        - Ferodo DS2500 front pads
        - Ferodo DS2500 rear pads
        - ATE Superblue brake fluid

        Wheels & Tyres:
        - AP1 wheels with Michelin PS3 - removed
        - AP1 wheels with Hankook RS3

        Exterior:
        - OEM AP1 JDM rear bar
        - OEM boot spoiler
        - removed AP1 OEM front spoiler

        Interior:- Alpine head unit
        - Pioneer 6inch splits
        - Modifry dash bracket
        - OEM Honda extended floor mats
        - replaced new OEM roll hoops
        - replaced new OEM sunvisors
        - replaced new OEM roof liner
        - Defi ZD clubsport package with Greddy sandwich plate, water hose adaptor
        - my old Skunk2 gearknob
        - removed Blox gearknob
        - new OEM centre console
        - new OEM wind deflector
        - new AP2 soft top with glass window
        - new OEM AP1 soft top latches
        - new OEM door hinges
        - new aftermarket alarm
        Last edited by plAythiNG; 23-06-15, 12:07 PM.
        Integra Type R
        Integra Type S
        S2000

        Comment


          #94
          Things yet to install:

          Engine:
          - oil catch can: Finailised on a closed loop/non vented setup. Going to go with the Saikou Michi unit simply because its a custom build and the accessories that can be attached are all custom and up to the end user
          - AP2 banjo bolts, retainers, and cotters
          - Moroso weld-in baffle plate complete with trap door
          - new gaskets and seals
          - new PCV when installing catch can setup

          Drivetrain:
          - 4.77 FD
          - ACT prolite flywheel
          - ACT heavy duty pressure plate
          - OEM clutch face
          - wouldnt mind doing a 1.5way LSD really further down the track
          - diff rebuild with new bearings and seal using OEM parts
          - new OEM clutch master cylinder
          - new OEM clutch slave cylinder
          - gearbox rebuild with new bearings and seals using OEM parts

          Suspension & Chassis:
          - New race orientated suspension
          - Hasport 62A engine mounts
          - Ikeya Formula front upper arms
          - Hardrace rear toe arms
          - Hardrace rear RCA
          - Hardrace front RCA
          - Hardrace front anti bump steer kit
          - Hardrace rear anti bump steer kit
          - corner weighted and aligned
          - new RDA blank rotors front
          - new RDA blank rotors rear
          - Project Mu HC+ front pads
          - Project Mu HC+ rear pads
          - new OEM hub bearings
          - ARP extended studs
          - OEM front caliper rebuild
          - OEM rear caliper rebuild
          - Whiteline front sway bar

          Wheels & Tyres:
          - CE28N 17x9+40 & 17x9.5+35
          - Federal RSR 255/40/17
          - BBS LM 18x9+35 & 18x10+50
          - Tyres in 235/40/18 & 265/35/18

          Exterior:
          - OEM side strakes
          - respray car, AP2 items, spare bootlid
          - source GT wing
          - AP2 taillight upgrade with all hardware
          - Moddiction blue convex mirror inserts
          - HeelToeAutomotive rear bumper cap

          Interior:
          - AP2 door cards
          - AP2 centre console
          - Nardi 350mm Deep Corn Steering Wheel
          - Works Bell quick release
          - Works bell short hub
          Last edited by plAythiNG; 23-06-15, 05:41 PM.
          Integra Type R
          Integra Type S
          S2000

          Comment


            #95
            Preparation for next track day on 03/08 will be:

            - Since I went back to OEM suspension, I am going to install my whiteline front sway bar
            - get alignment. max camber front and rear with 0.50degree more in the rear. 1mm each side toe-in on rears. max castor
            - hasport engine mounts
            - AP2 taillight upgrade
            - OEM side strakes

            Its quite hard to get my car to Top One since I store it at my in laws. so I get things done in batches to save me hassle of bringing car out of the garage and so fourth.

            5ish weeks to go for the next day! Super excited! Quite relieving and a big WTF at the mod list and parts ordered so far. fucking went crazy in 7 months of ownership lol
            Integra Type R
            Integra Type S
            S2000

            Comment


              #96
              Less buying, more installing!

              Comment


                #97
                Wanting to do small cahnges and go back to the track etc.

                biggest regret of my dc5.

                the only downside is I buy shit every day for the car!
                Integra Type R
                Integra Type S
                S2000

                Comment


                  #98
                  Wow that's quite an extensive modification list you have there already. Nice, but needs more pictures.
                  1999 Formula Red S2000 Blog

                  Comment


                    #99
                    Peter it only looks long because I did an interior upgrade to new parts!

                    Work internet restricts photobucket amongst it's many banned websites.

                    Pics are here!







                    CE28N Rears 17x9.5+35 with Federal RSR 255/40/17





                    Test fitted the wheels on the car



                    Picked up a used injen cai for $50 and put on a brand new K&N air filter!



                    I kinda like how SHIT my car looks atm. Mismatched bumpers, wheels that look completely fucked. I see people frown upon it lol, but all I see is the interior and it looks schmick lol!



                    TE37 that was ordered for my DC5 which I retired from track days and now sold. 17x9+28 and 17x9.5+28. If I still have these I will put on the S2000. BUY THEM, They're for sale!



                    With my respray I will also go AP2 badges front and rear. Prefer these as they add a modern touch to the S2K, contrary to the AP1 outdated badges IMO



                    I also picked up a Recaro SPG for track days. Wasnt fussed on colour!



                    My garage atm with some parts here and there dis and dat




                    Brand New Genuine OEM Side Strakes in GPW



                    Recently before my last track day I also had planned to strip my boot. Simply doing this purely for a cleaner setup.Plus it would have to be stripped for the AP2 tail light install. Parvez the previous owner decided to soundproof the shit out of this boot and bootlid. Ripped out all the interior and began removing all the sound proofing. Will eventually get rid of some of the sound deadening perhaps.



                    Also uncovered quite a bit of rust imo. Will get this all cut out and a new sheet welded in when I do the respray.

                    A pic from the track day with the ClubITR boys!







                    My favorite shot of my S2000 so far!



                    A flyby video of my car at full throttle down the straight at Wakefield. ITs so loud comparison to a Silvia still!



                    Random shot of my wheel racks!



                    The all new interior less AP2 centre console and door cards



                    Moddiction blue convex mirrors. Have a spare set for sale!
                    Last edited by plAythiNG; 23-06-15, 05:35 PM.
                    Integra Type R
                    Integra Type S
                    S2000

                    Comment


                      You mean you buy parts daily, not weekly...

                      Also do you even work during the day?
                      Shak's S2000

                      Comment


                        My job is to mod the S2000.

                        Check my linked in!
                        Integra Type R
                        Integra Type S
                        S2000

                        Comment


                          Kind reminder
                          Please update this for your pfr due tomorrow

                          Comment


                            PFR submitted boss!
                            Integra Type R
                            Integra Type S
                            S2000

                            Comment


                              I dont even know wtf to update lol.

                              Ive done two things with this car from the last update;

                              Wakefield again.

                              For this day I went back to OEM suspension and got some 17x9/10 wheels in 225/255 wide RS3. I was thinking i'd smash my pb with the tyre upgrade. Was incredibily cold all day with a tiny window of decent track temp for a solid lap. best time of the day was 1:14.1 a full second slower than my pb before. Disappointed in myself but oh well. another day another attempt ey!

                              the day was just shit. no confidence at all. I also feel that my brakes werent pulling me up quite as well also. just a bad day.

                              I also have been spending a few months researching different setups and open or closed loop setups etc for oil catch cans.

                              I'll try and get a detailed post tonight or something
                              Integra Type R
                              Integra Type S
                              S2000

                              Comment


                                How did the car handle with OEM suspension with that wheel and tyre setup Alex?
                                1999 Formula Red S2000 Blog

                                Comment

                                Working...
                                X